[ddots-l] Re: problem with sonar 4
- From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 2 Jun 2005 17:32:09 +0100
Well, you will be getting extra audio tracks because you probably have the box
check that adds extra
audio tracks. When inserting a synthe in the rack, make sure that box isn't
checked.
Regards, Phil Muir
P J Muir Productions
URL:
www.philmuir.com/
----- Original Message -----
From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, June 02, 2005 5:15 PM
Subject: [ddots-l] Re: problem with sonar 4
> I believe that sonar is working as advertised, but I was wondering if there
> may be some setting that causes it to do that. I have done all the things
> that you told me to do, but I still get more audio tracks than I need and
> the synth paches don't change in the track properties dialog of the one midi
> track that I do have.
> ----- Original Message -----
> From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Thursday, June 02, 2005 9:07 AM
> Subject: [ddots-l] Re: problem with sonar 4
>
>
> > Hi Neville!!
> >
> > Sonar is working as advertised. The preset window that you are referring
> > to is the preset window
> > for the DXi. Just use the key combination, control and F 4 to close that
> > window. That will place
> > you back in the synthrack view so, you will need to use Control and F4 to
> > close that window too.
> > You will then be back in the track view where you can adjust the MIDI
> > track and other properties.
> >
> > Regards, Phil Muir
> >
> > P J Muir Productions
> > URL:
> > www.philmuir.com/
> > ----- Original Message -----
> > From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
> > To: <ddots-l@xxxxxxxxxxxxx>
> > Sent: Wednesday, June 01, 2005 10:21 PM
> > Subject: [ddots-l] Re: problem with sonar 4
> >
> >
> >> When I hit alt V then H then A, 2 sub menues owpen. One is for rewire
> >> device
> >> and the other is for inserting DXI synths. After choosing a DXI, the same
> >> thing happens. I land on the presets menue where it says, save presets
> >> reset
> >> and cancel and so on. Before I use to have 2 tracks one midi and one
> >> audio,
> >> but now I get 5 tracks 4 audio and 1 midi. The paches don't change any
> >> more
> >> in the track properties dialog when I use my arro keys on the 1 midi
> >> track.
> >> After the tracks are inserted and I hit alt V then H, Sonar takes me
> >> right
> >> back to the track pain. I don't know why, it should take me to the synth
> >> rack view, but it doesn't do that.
> >> Thanks alot Phil for your help. Any more sergestions?
> >> ----- Original Message -----
> >> From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
> >> To: <ddots-l@xxxxxxxxxxxxx>
> >> Sent: Wednesday, June 01, 2005 5:12 AM
> >> Subject: [ddots-l] Re: problem with sonar 4
> >>
> >>
> >> > You may want to try doing it like this. Use the key combination Alt
> >> > and
> >> > the letter V, followed by
> >> > the letter H. That will place you in the synthrack view. Then, use
> >> > the
> >> > letter A, to add a
> >> > softsynthe. Check the various checkboxes when adding the softsynthe.
> >> >
> >> > Let us know how that works for you.
> >> >
> >> > Regards, Phil Muir
> >> >
> >> > P J Muir Productions
> >> > URL:
> >> > www.philmuir.com/
> >> > ----- Original Message -----
> >> > From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
> >> > To: <ddots-l@xxxxxxxxxxxxx>
> >> > Sent: Wednesday, June 01, 2005 4:04 AM
> >> > Subject: [ddots-l] problem with sonar 4
> >> >
> >> >
> >> >> I have a question about inserting soft sinths in sonar 4. I know that
> >> >> you
> >> >> hit alt+i and then X
> >> > then you choose wich Dxi you want to use. I know that when you choose
> >> > the
> >> > DXI a dialog box owpends.
> >> > The first 2 boxes should be checked and the rest should be unchecked.
> >> > Then
> >> > you press enter and you
> >> > will have 2 extra tracks one midi and the other audio. That's how it
> >> > works
> >> > in Sonar 3.
> >> >> Now, when I do this in Sonar 4 I get 1 midi track and 4 audio tracks.
> >> >> There is no dialog box any
> >> > more. When I choose the soft sinth, I land on the presets. Sometimes my
> >> > arro keys work and other
> >> > times it doesn't. Can some one please show me how to get it back to the
> >> > way it was in sonar 3?
> >> > Thanks for what ever help anyone can give.
> >> >> ** To leave the list, click on the immediately-following link:-
> >> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> >> ** If this link doesn't work then send a message to:
> >> >> ** ddots-l-request@xxxxxxxxxxxxx
> >> >> ** and in the Subject line type
> >> >> ** unsubscribe
> >> >> ** For other list commands such as vacation mode, click on the
> >> >> ** immediately-following link:-
> >> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> >> ** or send a message, to
> >> >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >> >>
> >> >>
> >> > ** To leave the list, click on the immediately-following link:-
> >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> > ** If this link doesn't work then send a message to:
> >> > ** ddots-l-request@xxxxxxxxxxxxx
> >> > ** and in the Subject line type
> >> > ** unsubscribe
> >> > ** For other list commands such as vacation mode, click on the
> >> > ** immediately-following link:-
> >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> > ** or send a message, to
> >> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >> >
> >> >
> >> >
> >>
> >> ** To leave the list, click on the immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> ** If this link doesn't work then send a message to:
> >> ** ddots-l-request@xxxxxxxxxxxxx
> >> ** and in the Subject line type
> >> ** unsubscribe
> >> ** For other list commands such as vacation mode, click on the
> >> ** immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> ** or send a message, to
> >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >>
> >>
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> >
> >
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
