[ddots-l] Re: problem with sonar 4
- From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 2 Jun 2005 11:59:19 -0400
I use to see those check boxes, but it doesn't pop up any more. When I hit
alt I then x, no check boxes appear.
----- Original Message -----
From: "Rod" <roddj12@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, June 01, 2005 8:37 PM
Subject: [ddots-l] Re: problem with sonar 4
> The thing is this, when you do the ALt I and X, there are two check boxes.
> One says create a midi tract with one output, and the other is suggestive
> of
> more than one output, make sure this one is unchecked and you should be
> good to go. I don't have the exact wording of these menus sonar is not in
> front of me, but it's self explanatory.
>
> Rod ----- Original Message -----
> From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Wednesday, June 01, 2005 5:21 PM
> Subject: [ddots-l] Re: problem with sonar 4
>
>
>> When I hit alt V then H then A, 2 sub menues owpen. One is for rewire
> device
>> and the other is for inserting DXI synths. After choosing a DXI, the same
>> thing happens. I land on the presets menue where it says, save presets
> reset
>> and cancel and so on. Before I use to have 2 tracks one midi and one
> audio,
>> but now I get 5 tracks 4 audio and 1 midi. The paches don't change any
> more
>> in the track properties dialog when I use my arro keys on the 1 midi
> track.
>> After the tracks are inserted and I hit alt V then H, Sonar takes me
>> right
>> back to the track pain. I don't know why, it should take me to the synth
>> rack view, but it doesn't do that.
>> Thanks alot Phil for your help. Any more sergestions?
>> ----- Original Message -----
>> From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Wednesday, June 01, 2005 5:12 AM
>> Subject: [ddots-l] Re: problem with sonar 4
>>
>>
>> > You may want to try doing it like this. Use the key combination Alt
>> > and
>> > the letter V, followed by
>> > the letter H. That will place you in the synthrack view. Then, use
>> > the
>> > letter A, to add a
>> > softsynthe. Check the various checkboxes when adding the softsynthe.
>> >
>> > Let us know how that works for you.
>> >
>> > Regards, Phil Muir
>> >
>> > P J Muir Productions
>> > URL:
>> > www.philmuir.com/
>> > ----- Original Message -----
>> > From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
>> > To: <ddots-l@xxxxxxxxxxxxx>
>> > Sent: Wednesday, June 01, 2005 4:04 AM
>> > Subject: [ddots-l] problem with sonar 4
>> >
>> >
>> >> I have a question about inserting soft sinths in sonar 4. I know that
> you
>> >> hit alt+i and then X
>> > then you choose wich Dxi you want to use. I know that when you choose
> the
>> > DXI a dialog box owpends.
>> > The first 2 boxes should be checked and the rest should be unchecked.
> Then
>> > you press enter and you
>> > will have 2 extra tracks one midi and the other audio. That's how it
> works
>> > in Sonar 3.
>> >> Now, when I do this in Sonar 4 I get 1 midi track and 4 audio tracks.
>> >> There is no dialog box any
>> > more. When I choose the soft sinth, I land on the presets. Sometimes my
>> > arro keys work and other
>> > times it doesn't. Can some one please show me how to get it back to the
>> > way it was in sonar 3?
>> > Thanks for what ever help anyone can give.
>> >> ** To leave the list, click on the immediately-following link:-
>> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> >> ** If this link doesn't work then send a message to:
>> >> ** ddots-l-request@xxxxxxxxxxxxx
>> >> ** and in the Subject line type
>> >> ** unsubscribe
>> >> ** For other list commands such as vacation mode, click on the
>> >> ** immediately-following link:-
>> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> >> ** or send a message, to
>> >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>> >>
>> >>
>> > ** To leave the list, click on the immediately-following link:-
>> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> > ** If this link doesn't work then send a message to:
>> > ** ddots-l-request@xxxxxxxxxxxxx
>> > ** and in the Subject line type
>> > ** unsubscribe
>> > ** For other list commands such as vacation mode, click on the
>> > ** immediately-following link:-
>> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> > ** or send a message, to
>> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>> >
>> >
>> >
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
