[ddots-l] Re: native instruments

  • From: DJX <megamansuperior@xxxxxxxxxxx>
  • To: "ddots-l@xxxxxxxxxxxxx" <ddots-l@xxxxxxxxxxxxx>
  • Date: Fri, 5 May 2017 22:06:33 +0000

Chris, anything I could use to feed a signal out of my interface, through a box 
or set of pedals, and then back in to the interface with effects?
In other words, without the amp requirement. ;)

Regards, DJX

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Chris Smart
Sent: Friday, May 05, 2017 1:37 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: native instruments

I have no idea what to recommend regarding hardware.
I got tired of wanting access to the latest and greatest, but finding things to 
be unworkable.  The best way for us, and I can't see this changing for a long 
time, is still a regular amp and some pedals, and of course a MIC to capture 
things.
There are load boxes you can put in line with said amp, to tame the volume.
At 01:31 PM 5/5/2017, you wrote:

So the best way to get good guitar tones would be hardware?
If so any good affordable recommendations?
I tried Line 6 PodFarm, no go either.
I've got a couple nice guitar samples, but they could use feeding 
through some distortions and the occasional chorus or wah pedal and 
such lol.

Regards, DJX

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Chris Smart
Sent: Friday, May 05, 2017 1:25 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: native instruments

I wish we could access Bias Desktop, or iOS for that matter. You can 
pick all the components of your amp, and the rest of the signal chain 
as well.

As far as I know, no parameters are exposed in the VST, and I couldn't 
figure out how to do anything wiht the iOS version.


At 02:37 PM 5/4/2017, you wrote:
Not accessible, only thing to do is access presets, and maybe make 
some changes in the inspector.

I'm still looking for a good software solution that will let us make 
our own tones and such, no louck thus far.

HTH, DJX


From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Dr. cc
Sent: Thursday, May 04, 2017 12:00 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] native instruments

Hello list,
I have been reading about guitar rig 5, is the program accessible for 
us? If so, What problems I might have with it? Thank you.



----------------------------------------
"There are two means of refuge from the miseries of life: music and 
cats." - Albert Schweitzer

PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately 
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to 
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq

PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately 
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to 
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq



----------------------------------------
"There are two means of refuge from the miseries 
of life: music and cats." - Albert Schweitzer 

PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, 
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to 
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq

PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq

Other related posts: