If you mean automatable parameters, sonar I believe shows those too, but what
would be nice would be to have access to loading certain components, and select
the separate presets for such components, such as room IR, cabinet type, amp
type, delay type etc, and having access to the rack so we can reorder stuff in
the way we want. But let us know what you find.
THX, DJX
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Mike Ciarciello
Sent: Friday, May 05, 2017 7:54 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: native instruments
I'm not sure, however on the Mac side in Logic when you open the plug in, you
can have access by viewing the controls in the plug in through the mixer, I'd
have to see if this is accessible. I'll get back to all you and let you know.
Cheers.
Sent from my iPhone
On May 4, 2017, at 2:37 PM, DJX
<megamansuperior@xxxxxxxxxxx<mailto:megamansuperior@xxxxxxxxxxx>> wrote:
Not accessible, only thing to do is access presets, and maybe make some changes
in the inspector.
I’m still looking for a good software solution that will let us make our own
tones and such, no louck thus far.
HTH, DJX
From: ddots-l-bounce@xxxxxxxxxxxxx<mailto:ddots-l-bounce@xxxxxxxxxxxxx>
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Dr. cc
Sent: Thursday, May 04, 2017 12:00 PM
To: ddots-l@xxxxxxxxxxxxx<mailto:ddots-l@xxxxxxxxxxxxx>
Subject: [ddots-l] native instruments
Hello list,
I have been reading about guitar rig 5, is the program accessible for us? If
so, What problems I might have with it? Thank you.