[ddots-l] Re: motu sound card
- From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 27 Mar 2008 10:42:55 -0000
Mike,
That's great - can you mail me back the renamed files so that I can post
them up for others to use?
Best wishes.
Tim Burgess
Raised Bar Ltd
Phone: +44 (0)1827 719822
Don't forget to vote for improved access to music and music technology at
http://www.raisedbar.net/petition.htm
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Mike C
Sent: 27 March 2008 10:31
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: motu sound card
Hey Tim, so far things are working fine with your scripts, I remained them
to the appropriate sound card, and I can gain access to the pan pots, and
enable the inputs with no problems.
by the way I found out how you can control the main out volume, you simplay
have to press the select knob two times, to cycle to this setting and there
you have it you can control the output volume.
I have my first vocal session to night, cross my fingers and hope this is
going to work.----- Original Message -----
From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, March 26, 2008 5:17 AM
Subject: [ddots-l] Re: motu sound card
> Hi,
>
> It's a combination of Jaws script and HSC and may need some tweaking
> for your interface, as it was written for my own PCI version. Go to:
>
> http://www.raisedbar.net/articles.htm
>
> I'll help modify if we can get in touch with each other.
>
> Best wishes.
>
> Tim Burgess
> Raised Bar Ltd
> Phone: +44 (0)1827 719822
>
> Don't forget to vote for improved access to music and music technology
> at
>
> http://www.raisedbar.net/petition.htm
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx
> [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Mike C
> Sent: 26 March 2008 02:47
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: motu sound card
>
> Hi Tim once again thanks a whole bunch. Despite the learning curve, I
> recorded yesterday with this card, and love the sound that it produces.
> Even with my guitar pluged in to one of the pre amps, the guitar's
> sound isn't lost like with all other audio cards.
> You said that you had some HSC files, I'd love to get a hold of them
> to see what kind of graphics I can see.
> At any rate take care.
>
> ----- Original Message -----
> From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Tuesday, March 25, 2008 9:20 AM
> Subject: [ddots-l] Re: motu sound card
>
>
>> Hi,
>>
>> I think you'll find the output level settings in the Audio Console,
>> not within CueMix.
>>
>> Best wishes.
>>
>> Tim Burgess
>> Raised Bar Ltd
>> Phone: +44 (0)1827 719822
>>
>> Don't forget to vote for improved access to music and music
>> technology at
>>
>> http://www.raisedbar.net/petition.htm
>>
>> -----Original Message-----
>> From: ddots-l-bounce@xxxxxxxxxxxxx
>> [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
>> On
>> Behalf Of Gordon Kent
>> Sent: 24 March 2008 21:23
>> To: ddots-l@xxxxxxxxxxxxx
>> Subject: [ddots-l] Re: motu sound card
>>
>> Mike:
>> I never have even tried to bother with the cue mix console. Since
>> you have a newer version of the motu than I have and they have made
>> some changes, I couldn't tell you how to raise the output. I think
>> it may be set to -10db but I'm not sure about that.
>> Gord
>>
>> ----- Original Message -----
>> From: Mike C <mailto:m_dsmusic@xxxxxxxxxxxx>
>> To: ddots-l@xxxxxxxxxxxxxxxx
>> Sent: Sunday, March 23, 2008 7:59 AM
>> Subject: [ddots-l] motu sound card
>>
>> Hey Gord or any one on list, I just purchased the Motu 8pre, and love
>> the card sound so far. My only concern is on how to get around the Q
>> mixing console, do I need to use the Jaws cursor?
>> and how can I efectivly lower or raise the main out volume?
>> Any help regarding this would be greatly appreciated.
>>
>>
>>
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode, click on the
>> immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the
> immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the
> immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
