Hey guys updating you on the status of my latency issues. I went to the options menu on sonar and clicked on audio. I clicked on the wave profiler and then messed with the buffer size. It was at 2 and 49 percent. I managed to get it down to 10 percent which allowed me to play a drum kit like the way i wanted to. any where from 10 to 25 percent, the response is excelent. However now i have another problem. I am getting drop outs after i play the second midi track. I try freezing the track with the drum kit and it would freeze everything and prevent me from further recording. Is there a way to freeze only one track Thanks I think i got my latency issues fixed. I still don't know for sure. Thanks for the assistance. On 10/15/11, Efren Chavez <efrenchavez91@xxxxxxxxx> wrote: > I checked on the start menu and didn't find anything new that related > to the soundcard. Should I reinstall the drivers or look in it to see > if i can find something? To DJX. I have a sony Vaio laptop duel core > intell 5 with 4 gigs of ram, and windows seven 64 bit professional. > However I installed the 32 bit of sonar version. Also, the project was > just a little demo to test the latency. I didn't load demention pro or > anything just the default cake walk tts. The computer seamed to be > doing good though. I think it's something to do with the interface. > I'm about to insert the disk again to see if i can find any thing. I > even tried finding something on the search box at start. > > Thanks > > On 10/15/11, D!J!X! <megamansuperior@xxxxxxxxxxx> wrote: >> It could be a buffer setting, or depending on your system it could be >> that >> it's not able to keep up with the demands of the soft synth and all the >> other processes. What are the specs for your system? OS, processor, >> amount >> of ram, software used etc. >> >> HTH, D!J!X! >> >> -----Original Message----- >> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] >> On >> Behalf Of Efren Chavez >> Sent: Saturday, October 15, 2011 8:46 PM >> To: ddots-l@xxxxxxxxxxxxx >> Subject: [ddots-l] having issues with the latency hearing popping sound >> in >> the background >> >> Hello everyone, >> >> I just got my sound card and it is a sonar tricapture USB. The latency >> level >> and response ok, but when i play a sequence of notes at a rapid pace it >> will >> not play like I did. Also, I am hearing a popping sound in the background >> and the sound sounds distorted. It sounds ok when I export though. I did >> some research and found that the popping sound may be due to small buffer >> size. Where would I change that. Also do asio drivers come pre-installed >> on >> the computer? If so how will I change the settings to optimize the >> latency >> issue and sound quality?I installed the tricapture soundcard drivers and >> didn;t mess with any settings. >> >> Thanks, sorry for the long message >> >> -- >> Efren Chavez >> PLEASE READ THIS FOOTER AT LEAST ONCE! >> To leave the list, click on the immediately following link: >> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >> If this link doesn't work then send a message to: >> ddots-l-request@xxxxxxxxxxxxx >> and in the Subject line type >> unsubscribe >> For other list commands such as vacation mode, click on the immediately >> following link: >> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to >> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq >> >> >> PLEASE READ THIS FOOTER AT LEAST ONCE! >> To leave the list, click on the immediately following link: >> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >> If this link doesn't work then send a message to: >> ddots-l-request@xxxxxxxxxxxxx >> and in the Subject line type >> unsubscribe >> For other list commands such as vacation mode, >> click on the immediately following link: >> ddots-l-request@xxxxxxxxxxxxx?subject=faq or >> send a message, to >> ddots-l-request@xxxxxxxxxxxxx >> and in the Subject line type >> faq >> >> > > > -- > Efren Chavez > -- Efren Chavez PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq