What about audio? Midi is covered.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Phil Muir
Sent: Thursday, May 11, 2017 11:11 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Surface controllers that work well with Sonar and
Samplitude
Well you could use the MIDI ports on the X-touch but I would use ports on
the Pro 40.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of James Malone
Sent: 11 May 2017 18:45
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Surface controllers that work well with Sonar and
Samplitude
Hey Phil, do you plug anything in to the X touch other than a USB cable or
power cable for Keyboard output? Or, is this all done through the Saffire?
I'm guessing that it's all done through the Saffire, but I want to be sure.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Phil Muir
Sent: Thursday, May 11, 2017 3:22 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Surface controllers that work well with Sonar and
Samplitude
Yes the X-touch works with Logic. Not sure about Pro Tools. I know some
are using the Faderport as that has true fader flip an works well in PT.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Mike Ciarciello
Sent: 10 May 2017 21:58
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Surface controllers that work well with Sonar and
Samplitude
And you know that I'm going to ask does the Behringer touch work with logic
or ProTools under the Mac
Sent from my iPhone
On May 10, 2017, at 2:49 AM, James Malone <malone_j@xxxxxxxxxxx> wrote:On
Hey Phil, I just checked out this demo. My ears are buzzing. Does this
software work with several surface controllers?
BTW, I found the Touch X for $599.00.
James
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx]
Behalf Of Phil MuirOn
Sent: Tuesday, May 9, 2017 12:19 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Surface controllers that work well with Sonar
and Samplitude
No page forh the app but you could take a listen to the Open Sound
Control demo here:
https://www.dropbox.com/s/ao7j620zaz9xe3t/OSC_Demo.m4a?dl=1
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx]
Behalf Of DJXreader
Sent: 09 May 2017 02:35
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Surface controllers that work well with Sonar
and Samplitude
Hi Phil, thanks for answering my unasked question ;) . I was
wondering about open sound support. Is there a page where I can read
about the
app? Just wondering if it's like Tim's surface reader, or if it'ssomething
different.On
Regards, DJX
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx]
Behalf Of Phil MuirX-touch
Sent: Monday, May 08, 2017 6:50 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Surface controllers that work well with Sonar
and Samplitude
Aah but you are talking about the BCF2000 which for the money isn't
bad although the motorised faders on it are a wee bit noisy where as
the
has very quiet motorised faders and tons of buttons so you don't haveuse
to
multiple keystrokes to achieve the same thing on the X-touch as it hasend
dedicated buttons for EQ etc.
Yes Behrenger did have issues however they have purchased some great
hi
UK companies such as Midas who know how to build great concels andControl
KLARK TEKNIK who build excellent affects and the people who worked for
those companies are now working for Behrenger which means we now have
some great audio pree-amps, and mixing concels such as the X32 which
you can get with Midas pre-amps in. Further more the X32 and X-touch
are Open Sound
compatible so when used in conjunction with Can's non screen redderPLEASE READ THIS FOOTER AT LEAST ONCE!
dependent application you will end up with a talking Behrenger X32 and
you can access all features such as solo, mute affects etc.
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectzq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq