Hey Phil, I just checked out this demo. My ears are buzzing. Does this
software work with several surface controllers?
BTW, I found the Touch X for $599.00.
James
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Phil Muir
Sent: Tuesday, May 9, 2017 12:19 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Surface controllers that work well with Sonar and
Samplitude
No page forh the app but you could take a listen to the Open Sound Control
demo here:
https://www.dropbox.com/s/ao7j620zaz9xe3t/OSC_Demo.m4a?dl=1
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of DJX
Sent: 09 May 2017 02:35
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Surface controllers that work well with Sonar and
Samplitude
Hi Phil, thanks for answering my unasked question ;) . I was wondering
about open sound support. Is there a page where I can read about the reader
app? Just wondering if it's like Tim's surface reader, or if it's something
different.
Regards, DJX
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Phil Muir
Sent: Monday, May 08, 2017 6:50 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Surface controllers that work well with Sonar and
Samplitude
Aah but you are talking about the BCF2000 which for the money isn't bad
although the motorised faders on it are a wee bit noisy where as the X-touch
has very quiet motorised faders and tons of buttons so you don't have to use
multiple keystrokes to achieve the same thing on the X-touch as it has
dedicated buttons for EQ etc.
Yes Behrenger did have issues however they have purchased some great hi end
UK companies such as Midas who know how to build great concels and KLARK
TEKNIK who build excellent affects and the people who worked for those
companies are now working for Behrenger which means we now have some great
audio pree-amps, and mixing concels such as the X32 which you can get with
Midas pre-amps in. Further more the X32 and X-touch are Open Sound Control
compatible so when used in conjunction with Can's non screen redder
dependent application you will end up with a talking Behrenger X32 and you
can access all features such as solo, mute affects etc.
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectzq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
