As far as I know yes all of that info does get sent over the network.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of DJX
Sent: 11 May 2017 15:20
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Surface controllers that work well with Sonar and
Samplitude
Mike, that's a good question. I'd mainly be interested in knowing if there
was some kind of advantage for example to know what parameters we are
controlling, say on the plug-in mode, with one of these boards and the OSc
support. For example, when controlling plug-ins, the universal control
displays the parameter you are adjusting on screen, and does so as well when
you are using it in EQ mode and such. Having audible feedback to this info
from the screen would be nice.
Does anyone know if the X-Touch can do this with the reader app? Since all
that info is sent out to the screen, does it also get sent on the network
attached devices?
Regards, DJX
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Mike Ciarciello
Sent: Thursday, May 11, 2017 7:12 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Surface controllers that work well with Sonar and
Samplitude
Hey Phil, thanks for that, just not sure whether I should keep my universal
control from Maggie or switch over to one of these two new boards
I suppose I'm trying to ask is I'm a better off just staying with what I
have or just going with one of these new boards which may give us better
axis Sent from my iPhone
On May 11, 2017, at 6:21 AM, Phil Muir <info@xxxxxxxxxxxxxxxxxxxxxxxxxxx>wrote:
PLEASE READ THIS FOOTER AT LEAST ONCE!
d you know that I'm going to ask does the Behringer touch work with
logic or ProTools under the Mac
Sent from my iPhone
On May 10, 2017, at 2:49 AM, James Malone <malone_j@xxxxxxxxxxx> wrote:On
Hey Phil, I just checked out this demo. My ears are buzzing. Does
this software work with several surface controllers?
BTW, I found the Touch X for $599.00.
James
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx]
Behalf Of Phil MuirOn
Sent: Tuesday, May 9, 2017 12:19 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Surface controllers that work well with Sonar
and Samplitude
No page forh the app but you could take a listen to the Open Sound
Control demo here:
https://www.dropbox.com/s/ao7j620zaz9xe3t/OSC_Demo.m4a?dl=1
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx]