The inputs say Left M audio fire wire project mix analog in one. That's the channel I have the mike plugged into. Doug. -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Farfar Carlson Sent: Sunday, March 20, 2011 7:20 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Retreeving matterial Doug, What does your input column say on each of your tracks? Dave Composed on a Dell Latitude 630 in the general vicinity of my Audio Recording and Mixing Studios, San Francisco Bay Area. ----- Original Message ----- From: "Doug Daniels" <douglasneal@xxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Sunday, March 20, 2011 19:06 Subject: [ddots-l] Re: Retreeving matterial Yes Cris, I have a Project mix one. When I load a older program, the sliders are set in the proper place, so it looks like the fire wire connection is working, that is to receive signals from the computer, but I can't get anything to sound when I plug a mike into the project mix. I have phantom power turned on, and the input for the channel set to the proper input. Doug. P.S. I also have arm and input echo turned on as well. -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Chris Smart Sent: Sunday, March 20, 2011 6:55 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Retreeving matterial Turned off? do you mean Sonar is no longer recognizing your soundcard/audio interface? PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq