No, your Mic is just fine. It's just how your Mixer is set internally and how
Sonar sees it as well I believe. Just take that first track and clone it enough
times. If you are starting from scratch with nothing in the projects at all,
then you can insert a track, and set your Mic input setting just as I
instructed with that one track, then just clone it say... 20 times for example.
Make sure you choose to not clone what's on the tracks as well so your tracks
will be blank.
If you would like to talk perhaps over Skype or something we can do that. I
don't mind.
Sent from my iPhone
On Oct 21, 2015, at 8:37 AM, Eddie Salcido <rednexican75@xxxxxxxxx> wrote:PLEASE READ THIS FOOTER AT LEAST ONCE!
Hello Ray. I have another track in which the input settings for the vocal are
exactly the same as those I described and where the interleave column is set
to stereo with the left channel being heard equally with no issue. Could an
incorrect placement of my Senheisser mic be causing the problem?
Sent from my iPhone
On Oct 20, 2015, at 6:28 PM, Raywonder <raywonder@xxxxxxxxxx> wrote:PLEASE READ THIS FOOTER AT LEAST ONCE!
Set your input of the audio track to input 1, ... or the left channel for
example and it'll fix it.
Sent from my iPhone
On Oct 20, 2015, at 8:11 PM, Eddie Salcido <rednexican75@xxxxxxxxx> wrote:PLEASE READ THIS FOOTER AT LEAST ONCE!
Hello everyone.
My audio tracks that I record with my microphone are only coming out of one
speaker while my audio tracks that are not recorded with the microphone
come out of both speakers normally. When I set the interleave column of the
recorded microphone tracks to mono, they come out of both speakers
normally. The pan levels for the tracks are centered, so any thoughts would
be appreciated. I have a tascam Fw1884 control surface, a Mackey 1202
mixer, and nearfield speakers.PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
