Hi,In message <796D98FF-49D9-4C08-A505-4708AEF0B562@xxxxxxxx>, Clive Bonsall <C.Bonsall@xxxxxxxx> writes
Notepad) ... and re-saved the DDL file. However, when I tried to open the DDL file with OPW, I got "File format not supported". Is that supposed to happen?
It's telling you that you're trying to load a file type it does not know about. One possibility is that when editing the paths the extensions got changed. e.g. xxxx/myjpeg.jpg became yyyy/myjpeg
I'd take it one step at a time, produce the DDL, try loading it, OK? Now change one filename by hand, try loading it again.
Bernard is quite right about using document relative paths, but he has quoted the format for RISC OS, slightly different for Windows:
{filedir}\picture.bmp(although I did change things so that the RISC OS format would work on Windows, so it might be OK)
-- David Pilling email: david@xxxxxxxxxxxxxxxxxxx web: http://www.davidpilling.net post: David Pilling, P.O. Box 22, Thornton-Cleveleys, Blackpool. FY5 1LR. UK fax: +44(0)870-0520-941 To unsubscribe or subscribe goto: //www.freelists.org/list/davidpilling