[bksvol-discuss] Re: OCR software
- From: "Larry Lumpkin" <llumpkin@xxxxxxxxxxxxx>
- To: <bksvol-discuss@xxxxxxxxxxxxx>
- Date: Mon, 17 Aug 2009 12:13:08 -0500
I thought scansoft would also scan in two-page mode.
-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Jackie McBride
Sent: Monday, August 17, 2009 12:04 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: OCR software
Valerie, what version of ReadIris do u have? I think 2-page mode is actually
a pretty standard feature amongst OCR apps, but, b4 opening mouth, inserting
foot, & chewing vigorously, I'd like to have a lookie-see & make certain.
Feet are tough, tend not to smell or taste good, biting 'em's hard on the
teeth & hard on the foot as well, so...
We'll get u set up. Have no fear. That's what this list is here for.
On 8/17/09, Valerie Maples <vlmaples@xxxxxxxxxxxxx> wrote:
> Dear Jackie;
>
> Thanks for the clarification, sometimes so many responses get added
> that I was want to make sure people know which person initiated. I
> vaguely remember using TextBridge some time ago, it must have come
> bundled with one of my previous scanners. It is not Vista compatible,
> unfortunately. I own OmniPage, but I find it cumbersome and not
> intuitive. My new scanner came with ReadIRIS Pro, but so far to the
> best of my comparisons, only FineReader has the ability to scan two
> pages at once and separate them when scanning books. If I make an
> investment at some, I want to be sure to have the best feature set
> possible to improve my accuracy and minimize my time. Any help along those
lines is greatly appreciated!
>
> Take care!
>
> Valerie
>
> Please pray for Doug's Dad & visit his website:
>
> http://www.caringbridge.org/visit/billkoonce
>
>
>
>
>> -----Original Message-----
>> From: bksvol-discuss-bounce@xxxxxxxxxxxxx [mailto:bksvol-discuss-
>> bounce@xxxxxxxxxxxxx] On Behalf Of Jackie McBride
>> Sent: Monday, August 17, 2009 11:37 AM
>> To: bksvol-discuss@xxxxxxxxxxxxx
>> Subject: [bksvol-discuss] Re: OCR software
>>
>> Valerie, she isn't. I'm responding specifically to your question,
>> because, truthfully, although there were a number of responses, I
>> didn't really see any that answered it.
>>
>> I asked if u were sighted because I don't think I'd make these
>> recommendations if u weren't. However, TextBridge from Nuance is a
>> reasonably priced, reasonably good OCR program. I'm not certain of
>> this, but I believe there may be a free trial u can download. Either
>> google it up or go to the nuance website. I really don't have that
>> address. It used to be scansoft.com & even when the name changed u
>> could still get there from that address. I don't know if that's still
>> applicable. If u have trouble, let me know & I'll provide more info
>> as I can.
>>
>> Also, since u obviously already have a scanner, often an OCR comes
>> bundled w/it. They're not the best, but they do work, & w/u being
>> sighted & therefore able to look at the picture vs. what was
>> recognized & make corrections, accuracy may not be as critical a
>> component as it is if u were blind. I'm not sayin they're terrible &
>> that you'd have to correct every word--that'd be a pita. Usually,
>> they're a trimmed-down version of a program already out there like
>> ReadIris, FineReader, OmniPage, TextBridge, etc. Their lack of
>> accessibility to the blind tends to be pretty noteworthy, which again
>> was the reason I needed confirmation that what I thought was true,
>> e.g., that u are sighted, in fact was accurate.
>>
>> We enjoy having u & Doug on list, we welcome u heartily, & hope that
>> u find both fulfillment & satisfaction in a job well done as well as
>> just a lot of good books to enjoy.
>>
>> Blessings for your week.
>>
>> On 8/17/09, Valerie Maples <vlmaples@xxxxxxxxxxxxx> wrote:
>> > Yes, Jackie, Doug and I are sighted, just disabled. Another person
>> asked
>> > about Kurzweil, though, and I am thinking she is not.
>> >
>> > Take care!
>> >
>> > Valerie
>> >
>> > Please pray for Doug's Dad & visit his website:
>> >
>> > http://www.caringbridge.org/visit/billkoonce
>> >
>> >
>> >> -----Original Message-----
>> >> From: bksvol-discuss-bounce@xxxxxxxxxxxxx [mailto:bksvol-discuss-
>> >> bounce@xxxxxxxxxxxxx] On Behalf Of Jackie McBride
>> >> Sent: Monday, August 17, 2009 10:58 AM
>> >> To: bksvol-discuss@xxxxxxxxxxxxx
>> >> Subject: [bksvol-discuss] Re: OCR software
>> >>
>> >> Valerie, you're sighted, right?
>> >
>> >
>> >
>> > To unsubscribe from this list send a blank Email to
>> > bksvol-discuss-request@xxxxxxxxxxxxx
>> > put the word 'unsubscribe' by itself in the subject line. To get a
>> list of
>> > available commands, put the word 'help' by itself in the subject
>> line.
>> >
>> >
>>
>>
>> --
>> Change the world--1 deed at a time
>> Jackie McBride
>> Check out my homepage at:
>> www.abletec.serverheaven.net
>> & please join my fight against breast cancer
>> <http://teamacs.acsevents.org/site/TR?px=1790196&pg=personal&fr_id=34
>> 89
>> >
>> To unsubscribe from this list send a blank Email to
>> bksvol-discuss-request@xxxxxxxxxxxxx
>> put the word 'unsubscribe' by itself in the subject line. To get a
>> list of available commands, put the word 'help' by itself in the
>> subject line.
>
>
>
> To unsubscribe from this list send a blank Email to
> bksvol-discuss-request@xxxxxxxxxxxxx
> put the word 'unsubscribe' by itself in the subject line. To get a
> list of available commands, put the word 'help' by itself in the subject
line.
>
>
--
Change the world--1 deed at a time
Jackie McBride
Check out my homepage at:
www.abletec.serverheaven.net
& please join my fight against breast cancer
<http://teamacs.acsevents.org/site/TR?px=1790196&pg=personal&fr_id=3489>
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
Other related posts:
