Hi Larry
Thanks for the feedback. I had the devices set up properly but hadn't
pointed JAWS to a different area under Utilities > Sound Card in JAWS.
Thanks for the link to the scripts - I'll give them a go.
Cheers
Mark
(M) +61 413 887 323
This Electronic Mail Message and its attachments are confidential. If you
are not the intended recipient, you may not disclose or use the information
contained in it. If you have received this Electronic Mail Message in error,
please advise the sender immediately by replying to this email and delete
the message and any associated attachments. While every care is taken, it is
recommended that you scan the attachments for viruses.
From: audacity4blind-bounce@xxxxxxxxxxxxx
<audacity4blind-bounce@xxxxxxxxxxxxx> On Behalf Of Larry Lumpkin
Sent: Wednesday, 6 May 2020 7:16 AM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: JAWS, Audacity And Audio Technical LP120
Turntable
Mark, you have to set the input and output in audacity. Set the input to
line-in audio codek and output to your sound card.
From: audacity4blind-bounce@xxxxxxxxxxxxx
<audacity4blind-bounce@xxxxxxxxxxxxx> On Behalf Of Adrian
Sent: Tuesday, May 5, 2020 6:01 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: JAWS, Audacity And Audio Technical LP120
Turntable
Hi Mark,
Here is the link for the Jaws script.
https://www.dropbox.com/s/xe7yx5cbtijkzfy/Jaws-Script-for-Audacity_2_2_2-bet
a-2020-03-02.exe?dl=1
Not sure if it will solve your problem but it has some good features.
What I have done when I 1st used Audacity was:
1. Press ctrl+p for preferences.
2. Press "d" for devices.
3. Tab twice to"playback grouping"
4. Move the cursor up & down until you hear the audio from the
speakers.
Regards
NPTE: I tried it today & found I only get onlya quick bit of output.
I had to tab out & back into the field to hear it.
It's not as hard as it sounds though.
Hope this is helpful.
Regards
Adrian
From: audacity4blind-bounce@xxxxxxxxxxxxx
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of
fishsilv@xxxxxxxxxxxx
Sent: Tuesday, 5 May 2020 10:57 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] JAWS, Audacity And Audio Technical LP120 Turntable
Hi
I am new to the list and Audacity and understand many of you are using
Audacity to create amazing stuff based on the few posts I've seen.
At this stage, all I want to do is record my old vinyl records so apologies
for simple questions.
My first challenge is that when I plug in the turntable to my windows 10 PC,
I lose JAWS speech. Not helpful when I'm trying to use Audacity. Any tips
would be helpful.
Also, I have noted in the archives that someone had written scripts at some
stage. Are these still available and if so from where and what is the cost?
Cheers
Mark
(M) +61 413 887 323