Hi Kristoffer
This reply is a bit slow in coming because I wanted to check out the
Xenyx 302, which is on my desk at work, before commenting. Towards the
top of the mixer are three columns of two RCA sockets. As you probably
know by now, the two sockets on the right are the line out. If you
connect - say - your iPhone to the middle set you can record through
that input while also recording from whatever is coming through the USB
interface. To record both at once the left-most button must be down.
But coming in through that input the level is flat. That is, you cannot
adjust the level from the mixer, so you have to adjust from the source.
If you use the inputs on the left column you can adjust the level from
the mixer. However, you cannot record from that along with what is
coming in via the USB section.
Have fun.
Andrew
On 19/08/2016 5:53 PM, Kristoffer Gustafsson wrote:
Hi.
that was nice. I had almost given up.
do you think that there is a socket on the mixer I can set another
thing? for example my iphone?
I want to show people some games some day.
If so, I can use just this instead of behringer xenyx 1202.
but since I sucseeded with this one, there must be a way to do this
with the other mixer as well?
/Kristoffer
2016-08-18 23:53 GMT+02:00, Andrew Downie <access_tech@xxxxxxxxxxxxxx>:
Congratulations. As mentioned earlier, sorting out multiple sound cards
can be confusing at first.
You mentioned in a previous post that it just showed microphone for the
USB audio CODEC. Regardless of how many channels the mixer has, the
system will just report it as microphone. As you have discovered by
now, that does not stop you from recording from any channel on the mixer.
Andrew
On 19/08/2016 2:20 AM, Kristoffer Gustafsson wrote:
Hi.
Solved it. There was not much buttons on the mixen, so i played
around, and found the correct buttons.
Finally i have found a good mixer.
Skickat från min iPhone
18 aug. 2016 kl. 16:46 skrev Gene <gsasner@xxxxxxxxx
<mailto:gsasner@xxxxxxxxx>>:
You said you've inserted it now. Inserted what?
As I understand it, you have line-in for the built-in Realtech
soundcard, but whatever device you are discussing, it doesn't show
that option.
Gene
----- Original Message -----
Hi.<mailto:jacob@xxxxxxxxxxxxx>>:
I've inserted it now.
it is rezognised as usb audio codec.
I can only select microphone in the codec. nothing more.
The line is just for the realtek card.
/Kristoffer
2016-08-18 15:03 GMT+02:00, Jacob Kruger <jacob@xxxxxxxxxxxxx
handlesI'd still say check out the sound card settings, just in case - as
in,
it's possible the line-in is muted by default, and that goldwave
audacity.that in the background.
In audacity, what is your audio host set to? That could also affect
which recording devices show up, but, if you try changing those, then
first also make mental notes about initial values...<smile>
Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."
On 2016-08-18 11:25 AM, Kristoffer Gustafsson wrote:
Hi.
when using goldwave I can select line in as record device. not
<mailto:jacob@xxxxxxxxxxxxx>>:strange.
2016-08-18 9:04 GMT+02:00, Jacob Kruger <jacob@xxxxxxxxxxxxx
don'tSound card settings? Make sure line-in is available, etc., but,
else youthink you want to generally turn on the listen to it option, or
to playmight be hearing it's output all the time, but, you might want
<mailto:jacob@xxxxxxxxxxxxx>>:around with that to see if it's operating/working as such.
Unfortunately, current primary machine doesn't have one of those,
so
can't giv3e you more details, but anyway.
Stay well
Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."
On 2016-08-18 8:32 AM, Kristoffer Gustafsson wrote:
Hi.
I want to have line.in, but that option do not show up in
audacity.
I can set line in as standard in windows, but when i record i get
nothing.
Skickat från min iPhone
17 aug. 2016 kl. 20:10 skrev Jacob Kruger <jacob@xxxxxxxxxxxxx
<mailto:audacity4blind-request@xxxxxxxxxxxxx>In audacity, on the transport toolbar, which device is set as the
input/recording device?
Stay well
Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."
On 2016-08-17 7:58 PM, Kristoffer Gustafsson wrote:The audacity4blind web site is at
Hi.
I got a mixer before that I plan to use at home.
I could record fine with that one.
but now I cannot record anything.
I have the mixer connected to the line in of my computer.
but when I try to record... nothing at all.
do you have any solution?
/Kristoffer
//www.freelists.org/webpage/audacity4blind
Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...
To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
<mailto:audacity4blind-request@xxxxxxxxxxxxx>with subject lineThe audacity4blind web site is at
unsubscribe
//www.freelists.org/webpage/audacity4blind
Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...
To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
<mailto:audacity4blind-request@xxxxxxxxxxxxx>with subject lineThe audacity4blind web site is at
unsubscribe
//www.freelists.org/webpage/audacity4blind
Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...
To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
<mailto:audacity4blind-request@xxxxxxxxxxxxx>The audacity4blind web site is atwith subject line
unsubscribe
//www.freelists.org/webpage/audacity4blind
Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...
To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe
The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind
Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...
To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
<mailto:audacity4blind-request@xxxxxxxxxxxxx>
with subject line
unsubscribe
