[argyllcms] rgb printer calibration
- From: Radek Doulik <radek.doulik@xxxxxxxxxx>
- To: argyllcms <argyllcms@xxxxxxxxxxxxx>
- Date: Sat, 22 May 2010 22:21:49 +0200
Hi,
I am trying to create chart for RGB printer calibration. I run targen
with these options:
targen -v -d2 -s52 -e3 -f0 linearization-target
The resulting chart contains RGB values of CMY color shades. I was
expecting to see color shades of red, green and blue. Is it a bug in
targen, or do I miss something?
Cheers
Radek
First ten patches:
NUMBER_OF_FIELDS 7
BEGIN_DATA_FORMAT
SAMPLE_ID RGB_R RGB_G RGB_B XYZ_X XYZ_Y XYZ_Z
END_DATA_FORMAT
NUMBER_OF_SETS 156
BEGIN_DATA
1 100.00 100.00 100.00 95.106 100.00 108.84
2 100.00 100.00 100.00 95.106 100.00 108.84
3 100.00 100.00 100.00 95.106 100.00 108.84
4 98.039 100.00 100.00 93.309 99.073 108.76
5 96.078 100.00 100.00 91.558 98.171 108.68
6 94.118 100.00 100.00 89.854 97.292 108.60
7 92.157 100.00 100.00 88.197 96.437 108.52
8 90.196 100.00 100.00 86.585 95.606 108.44
9 88.235 100.00 100.00 85.019 94.799 108.37
10 86.275 100.00 100.00 83.498 94.015 108.30
...
Other related posts:
