[argyllcms] Re: printtarg: Error - Internal - half edges don't match
- From: János, Tóth F. <janos666@xxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Sat, 5 Oct 2013 02:59:02 +0200
Could it be a problem that I didn't disable the colored spacers? Is this
supported by scanin (when it tries to find the sampling areas) and/or
targen (when it creates a cht file)?
2013/10/2 János, Tóth F. <janos666@xxxxxxxxxx>
> I did need the chart recognition file even though I also used my
> ColorMunki.
> I tried to profile my camera with a home-printed test chart.
>
> Here is what I did:
>
> https://skydrive.live.com/redir?resid=427C4D1A2E67EAEF!1409&authkey=!AP8ly8GV-OnsGPM
> (camera_caltest.7z ~ 37Mb with the tiff files)
>
> colprof reported high peak and average errors but the simulation doesn't
> look catastrophic. But it does if I try to create Lab or XYZ cLUT profile
> for the camera instead of a simple matrix with linear gamma.
>
>
> 2013/10/2 Graeme Gill <graeme@xxxxxxxxxxxxx>
>
>> If you have a CM instrument, then you don't need scan recognition.
>>
>
>
Other related posts:
