Hi A working adapter ( Spectrolino / Spectroscan / DTP92 ) ( I a´m not so found of minidin ) and a 9 to 25 adapter DB9F MiniDin 8 F DB25 1 8 2 5 3 3 3 2 4 20 5 4 ( perhaps ev 8 ) 7 6 6 7 6 4 8 2 5 9 22 Mindin8 spectrolino power 7 V+ Spectroscan supply +24V ( (12) 15-24V ok) 8 0V Gnd Minidin 8 8 7 6 5 4 3 2 1 //MW 2010/5/3 Graeme Gill <graeme@xxxxxxxxxxxxx> > Magnus Wallden wrote: > >> The Spectrolino "mode" dont work, for this it need a external power >> supply, >> or a 8p minidin extension for power from spectroscan. >> > > Right. According to the manual, Pin 7 (of the 8 pin) is > +10 to +24 Volts at 4 Watts, and Pin 8 is Power Ground. > > > that whit about 5-6 mm dia outline and a hole for a pin, but no polarity >> and >> no voltage. >> > > The normal power supply is 15V DC @ 0.8A, Center is +ve, but from > the above, 12 Volts will probably work too. > > Graeme Gill. > >