[argyllcms] Re: Spectrolino / (Spectroscan ) External power supply

  • From: Graeme Gill <graeme@xxxxxxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Mon, 03 May 2010 23:05:44 +1000

Magnus Wallden wrote:
The Spectrolino "mode" dont work, for this it need a external power supply,
 or a 8p minidin extension for power from spectroscan.

Right. According to the manual, Pin 7 (of the 8 pin) is
+10 to +24 Volts at 4 Watts, and Pin 8 is Power Ground.

that whit about 5-6 mm dia outline and a hole for a pin, but no polarity and
no voltage.

The normal power supply is 15V DC @ 0.8A, Center is +ve, but from
the above, 12 Volts will probably work too.

Graeme Gill.

Other related posts: