[argyllcms] Problem with calibration
- From: Fridtjof Busse <fbusse@xxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Sun, 1 Mar 2009 16:18:47 +0100
Hello,
I recently purchased a SQUID 2 (same as X-Rite i1) and did some
profiling/calibration with Argyll as well as the included basICColor.
Although Argyll and basICColor agree on quite a few things
(white-/blackpoint), the resulting icc profiles are very different.
For example: If I use the profile produced by Argyll, many of the
numbers on the testchart [1] are invisible, while the profile from
basICColor shows even the "1" (though very weak).
I used dispcalGUI and set the same parameters as with basICColor (as far as
possible).
Any way to determine why the profiles are so different?
Thanks.
[1] http://www.fc-prints.de/fileadmin/daten/einser.jpg
--
Fridtjof Busse
Other related posts:
