Hi,I think there was already a discussion about the topic in January. The thread starts here:
//www.freelists.org/post/argyllcms/In-the-shadowlands Regards, Florian Höch Fridtjof Busse schrieb:
Hello, I recently purchased a SQUID 2 (same as X-Rite i1) and did some profiling/calibration with Argyll as well as the included basICColor. Although Argyll and basICColor agree on quite a few things (white-/blackpoint), the resulting icc profiles are very different. For example: If I use the profile produced by Argyll, many of the numbers on the testchart [1] are invisible, while the profile from basICColor shows even the "1" (though very weak). I used dispcalGUI and set the same parameters as with basICColor (as far as possible). Any way to determine why the profiles are so different? Thanks. [1] http://www.fc-prints.de/fileadmin/daten/einser.jpg