Epson RGB calibration?
I never « calibrated » an Epson inkjet printer prior to sending it any
characterization target. It’s not a printing press, it’s an RGB-driver based
output device. As long as one sticks to the same “paper presets” (Matte vs
Gloss vs ….) in the Print settings screen, Mac or PC, and selects the “No Color
Management” option, I fail to see what “calibration” would afford anyone in
terms of “extra accuracy”: I routinely get less than 1 deltaE AVG on an IT8.7/4
simulating GRACoL.
Vous cherchez des « poux ».
/ Roger
From: argyllcms-bounce@xxxxxxxxxxxxx <argyllcms-bounce@xxxxxxxxxxxxx> On Behalf
Of Yves Gauvreau
Sent: Sunday, March 20, 2022 4:46 PM
To: argyllcms@xxxxxxxxxxxxx
Subject: [argyllcms] Re: High quality printer profile?
Alan see below.
Thanks,
Yves
On 3/19/2022 5:45 PM, Alan Goldhammer (agoldhammer) wrote:
Check your manual, it tells you how to do the calibration and you should have
done this during the set up process.
Do you do only the self calibration and or you do an Argyll calibration on top
of that?
For what it's worth, my own profiling workflow is to make an initial profile
using a 924 patch set (two letter size pages). I use this profile as a
pre-conditioning profile for the final profile.