[analogorgans] Re: soldering....
- From: "milton miller" <organgrinder64@xxxxxxxxxxx>
- To: <analogorgans@xxxxxxxxxxxxx>
- Date: Sun, 17 Oct 2004 16:01:06 -0400
hi jean; it's organgrinder64@xxxxxxxxxxx ,i'm thinking the 220 is
very closely related to the 220.maybe almost the same organ.did both of
these come with speakers?good luck getting them to work.you say you're
keeping one? milt
----- Original Message -----
From: "Jean Moquin" <jean.moquin@xxxxxxxxxxxx>
To: <analogorgans@xxxxxxxxxxxxx>
Sent: Sunday, October 17, 2004 2:08 PM
Subject: [analogorgans] Re: soldering....
> Hello Miton,
>
> Please, send me you e-mail, so I could forward you some pics...
>
> Jean
> ----- Original Message -----
> From: "milton miller" <organgrinder64@xxxxxxxxxxx>
> To: <analogorgans@xxxxxxxxxxxxx>
> Sent: Sunday, October 17, 2004 1:07 PM
> Subject: [analogorgans] Re: soldering....
>
>
>> hi there jean; i didn't know you had a 220.i thought you had a 330.did
> you
>> just get this/ milt(i have a conn 652 right now) milt miller
>> ----- Original Message -----
>> From: "Jean Moquin" <jean.moquin@xxxxxxxxxxxx>
>> To: <analogorgans@xxxxxxxxxxxxx>
>> Sent: Sunday, October 17, 2004 7:32 AM
>> Subject: [analogorgans] soldering....
>>
>>
>> > Hello List,
>> > Just to share....While searching for a dead note on the Swell
> (Rodgers
>> > 220-II), I checked and re-checked every components in the chain...the
>> > scope was showing a nice sine curve everywhere....I also looked
> (visualy)
>> > for a broken connection or bad solder.....I finaly found the culprit: a
>> > broken connection between a resistor, on one side of a card, and the
>> > busbar on the other side....The original solder, on the bus, looked
>> > very
>> > good, bus the connecting wire was actualy broken right inside the card
>> > tickness....This using the buzzer position on the multimeter...
>> >
>> > Best regards to everyone....
>> >
>> > Jean
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>>
>>
>
>
>
Other related posts:
