[analogorgans] soldering....
- From: "Jean Moquin" <jean.moquin@xxxxxxxxxxxx>
- To: <analogorgans@xxxxxxxxxxxxx>
- Date: Sun, 17 Oct 2004 07:32:53 -0400
Hello List,
Just to share....While searching for a dead note on the Swell (Rodgers
220-II), I checked and re-checked every components in the chain...the scope was
showing a nice sine curve everywhere....I also looked (visualy) for a broken
connection or bad solder.....I finaly found the culprit: a broken connection
between a resistor, on one side of a card, and the busbar on the other
side....The original solder, on the bus, looked very good, bus the connecting
wire was actualy broken right inside the card tickness....This using the buzzer
position on the multimeter...
Best regards to everyone....
Jean
Other related posts:
