[analogorgans] Re: soldering....
- From: "milton miller" <organgrinder64@xxxxxxxxxxx>
- To: <analogorgans@xxxxxxxxxxxxx>
- Date: Sun, 17 Oct 2004 13:07:45 -0400
hi there jean; i didn't know you had a 220.i thought you had a 330.did you
just get this/ milt(i have a conn 652 right now) milt miller
----- Original Message -----
From: "Jean Moquin" <jean.moquin@xxxxxxxxxxxx>
To: <analogorgans@xxxxxxxxxxxxx>
Sent: Sunday, October 17, 2004 7:32 AM
Subject: [analogorgans] soldering....
> Hello List,
> Just to share....While searching for a dead note on the Swell (Rodgers
> 220-II), I checked and re-checked every components in the chain...the
> scope was showing a nice sine curve everywhere....I also looked (visualy)
> for a broken connection or bad solder.....I finaly found the culprit: a
> broken connection between a resistor, on one side of a card, and the
> busbar on the other side....The original solder, on the bus, looked very
> good, bus the connecting wire was actualy broken right inside the card
> tickness....This using the buzzer position on the multimeter...
>
> Best regards to everyone....
>
> Jean
>
>
>
>
>
>
Other related posts:
