[amayausers.com] Re: false bobbin breaks, x axis only

From: theboards@xxxxxxxxxxxxxx
To: amayausers@xxxxxxxxxxxxx
Date: Wed, 24 Aug 2011 00:55:08 UT

This message was posted by Greenwing on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1221.html#000011

I use just enough to make them tacky.
Very little, Cleaning them is a breeze I us 
naptha, Kingsford lighter fluid is Naptha.

It is used in the refinishing industry as a way to clean wood of wax and other 
impurities.

I do not Clean the hoop vey often at all I clean if they get REALLY linty but 
other wise. just leave it be.

Do not hoop while the adhesive is wet only after it has set up a minute or two 
and you will not need to tighten your hoop near as tight.

Give it a try.

Never spray by your machine. i use a large pizza box.

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

[amayausers.com] Re: false bobbin breaks, x axis only

Other related posts: