[amayausers] Re: X MOTOR TRACKING ERROR
- From: "D Stitch" <dstitch@xxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 10 May 2006 21:11:40 -0700
It sounds like you have the cap too tightly hooped. Try loosing the cap and
see if it works.
Dianne
D-Stitch Embroidery
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Kesavan
Sent: Wednesday, May 10, 2006 8:10 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] X MOTOR TRACKING ERROR
I am trying to run wid caps on the amaya.
When I trace the design I get x motor tracking error and the machine
frezees.
The design is well within the hoop limits
Anand
Other related posts:
