Hi Anand I ran into that one time and ended up taking the bill or snout holder off the frames. They would hit the cast aluminum part of the machine and stall the travel. Since then I have not put that holder back on the frames and have had no problems. Larry ice_man21@xxxxxxxxxxxxx -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Kesavan Sent: Wednesday, May 10, 2006 11:10 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] X MOTOR TRACKING ERROR I am trying to run wid caps on the amaya. When I trace the design I get x motor tracking error and the machine frezees. The design is well within the hoop limits Anand -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.6/337 - Release Date: 5/11/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.6/337 - Release Date: 5/11/2006