[amayausers.com] Re: Use of 60 wt thread on Amaya?
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 6 Apr 2011 15:17:55 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1453.html#000001
Jim,
The 60wt thread will work fine on the Amaya. It is used mostly for "small"
lettering with the aid of a 65/9 needle. This woll gill small lettering a
sharper mor crisp edge in a lot of cases as the 65/9 needle is poking smaller
holes on the edge of the column.
Because it is thinner and does not provide the same coverage as 40wt thread,
digitizing densities may need to be altered depending on the results required.
As an example....if a line of lettering was digitized with a density of 5 or 6,
then the 60wt thread would cover better if the density was adjusted to 4 or 5
respectfully.
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
