This message was posted by Posh LittleThings on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1045.html#000004 Well, something has to be wrong with the machine. I can see the thread looping by the bobbin case, I was on the phone with Melco Tech and did the finger test (or whatever is called, that actually came out wrong) and it was fine, I was reading about it here at the forum and It hought it could be some issues with the rotary hook timing, I tried again today another design and the quality of the stitches is very poor. My machine was running so good before this incident, and I know what kind of quality to accept form my Xt, so what is doing right now is completely unacceptable. I mean, the thread should be coming off and going all over at the bobin case/rotary hook, right? =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================