[amayausers] Re: Roller Maintenance
- From: "Cheryl Rotter" <tsiemb@xxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 10 May 2006 09:40:09 -0700
Thanks Herb I'll take a little look at the rollers. My machines only run
about 6 hours per day on average, 5 day a week. Some days only 4 hours
depending on the sales.
My thread breaks usually come from a faulty design. I've had some I
can't explain, but usually I trace it to a bad needle, poor hooping, or
bad trims. A few that seemed to have no reason ended up being thread
wrapped around the area behind the yellow rollers or thread wrapped
round the rotary hook.
Cheryl Rotter
Team Sports Ink
5111 Grumann Dr. Ste #1B
Carson City, NV 89706
775-884-3550
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of HK Acree
Sent: Tuesday, May 09, 2006 5:40 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Roller Maintenance
Fairly busy, pull 2 or 3 off real quick and take a look at them. Will
give
you a much better idea as to where you are. Unexplained thread
breaks????
Once in a while for no real reason???
Herb
----- Original Message -----
From: "Cheryl Rotter" <tsiemb@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, May 09, 2006 2:34 PM
Subject: [amayausers] Re: Roller Maintenance
> Herb,
> That sounds much better. How busy are you? I am wondering maybe I have
> some undiagnosed problems that I could resolve with more frequent
> lubrication on those rollers.
> cr
>
> Cheryl Rotter
> Team Sports Ink
> 5111 Grumann Dr. Ste #1B
> Carson City, NV 89706
> 775-884-3550
>
>
> -----Original Message-----
> From: amayausers-bounce@xxxxxxxxxxxxx
> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of HK Acree
> Sent: Tuesday, May 09, 2006 12:24 PM
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] Re: Roller Maintenance
>
> Cheryl:
> Three weeks between lubrication...
> Herb
> ----- Original Message -----
> From: "Cheryl Rotter" <tsiemb@xxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Tuesday, May 09, 2006 12:13 PM
> Subject: [amayausers] Re: Roller Maintenance
>
>
>> Herb,
>> Are you getting 3 weeks between lubrication or worn out in 3 weeks? I
>> put the new rollers on my older AMAYAs in November, and have done
some
>> lubrication on specific rollers as I notice they need it. Other than
>> that I have been following the maintenance prompts on the lubrication
> of
>> red and yellow rollers.
>>
>> Cheryl Rotter
>> Team Sports Ink
>> 5111 Grumann Dr. Ste #1B
>> Carson City, NV 89706
>> 775-884-3550
>>
>>
>> -----Original Message-----
>> From: amayausers-bounce@xxxxxxxxxxxxx
>> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of HK Acree
>> Sent: Tuesday, May 09, 2006 10:31 AM
>> To: amayausers@xxxxxxxxxxxxx
>> Subject: [amayausers] Re: Roller Maintenance
>>
>> Aaron,
>> I am getting about three weeks out of mine. Are you noticing cracking
>> developing from the hub out to the edge.
>>
>> Herb
>> Royal Embroidery
>> ----- Original Message -----
>> From: "Linen Barn" <linen@xxxxxxxxxxx>
>> To: <amayausers@xxxxxxxxxxxxx>
>> Sent: Tuesday, May 09, 2006 7:37 AM
>> Subject: [amayausers] Roller Maintenance
>>
>>
>>>A curious question. How often is everyone greasing the red and
yellow
>>> rollers. I find my red rollers are dryng up in 1-2 weeks. Just
>> wondering
>>> about everyone else. Gets time consuming to grease 72 rollers (36
> red
>> and
>>> 36 yellow) every week or 2. I should mention my machines are
getting
>> lots
>>> of time logged lately :)
>>>
>>>
>>> Aaron Sargent
>>> The Linen Barn
>>> linen@xxxxxxxxxxx
>>> 541-770-2957
>>> Medford, OR
>>>
>>
>>
>>
>
>
Other related posts:
