[amayausers.com] Re: Queue design
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 25 Jan 2011 15:42:04 UT
This message was posted by GF on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL.
Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1114.html#000001
Yes, changing the settings in auto actifeed is very useful and takes trial and
error. I have two XT's and each one requires a different setting depending on
the embroidery project. The bobbin tension is crucial to the thread break issue
and the correct bobbin makes a difference. I only use NEB bobbins, but I have
heard others claim success with Coats. Keep in mind that every machines, even
though identical, will not be a "one setting fits all" type of thing. The XT is
just a tool and as with any tool, knowing the best way to adjust it to your
skill is key.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
