[amayausers] Re: Problem Design or AMAYA ?????

  • From: "Linen Barn" <linen@xxxxxxxxxxx>
  • To: <amayausers@xxxxxxxxxxxxx>
  • Date: Tue, 21 Jun 2005 09:42:55 -0700

Shannon,

What type of needles are you using? On knits you should be using ball points. The sharps could cause holes. Also might want to look at density. Are the holes around the lettering? You might make the lettering less dense.

I would offer to look at your design but I just don't have time. I have over 300 Allstar hats (front, back, sides) to get done this week. Then I get to start on full back jackets and sweatshirts for Allstars, I expect around 250 of them this year :)

Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
Medford, Oregon
----- Original Message ----- From: <embroideryexpress@xxxxxxxxxxx>
To: <Amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, June 21, 2005 9:14 AM
Subject: [amayausers] Problem Design or AMAYA ?????


I have a project (promised last week) with 2 problems.

1) At the conclusion of each sew-out on the last stitch I got an X Y tracking error (design would fit in 15 hoop....was using 18 to avoid and this continued to happen).

2) Jackets turned out fine, as wll as thick polos. Majority of the order is a 60/40 blend. Holes were being made in the shirt at one point (not picked up by my helper) and now I must replace 4 polos....4 day ship....YUK!!!!!!

Could someone take a look at my design and tell me what is causing these 2 things?

Thanks!
Shannon


Other related posts:

  1. Home
  2. amayausers
  3. Archive
  4. 06-2005