[amayausers] Re: Inconsistent Letter Height
- From: "Thomas LaDow" <tcladow@xxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Thu, 4 May 2006 18:58:18 -0500
Aaron;
The work email is up and running. Thank you ! I also sent Herb a copy of
my versions for Pro+ and Amaya OS.
Thank you,
Tom LaDow
Creative Promotions
----- Original Message -----
From: "Linen Barn" <linen@xxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, May 03, 2006 6:36 PM
Subject: [amayausers] Re: Inconsistent Letter Height
> Thomas,
>
> Let me know what e-mail you want signed up and I can do that for you.
> Also
> let me know if you want to keep the current one as well or if you want
> that
> one deleted. You can e-mail me direct at the address below.
>
> I am curious as to what your version is as well. I typed in the letters
> as
> you said and they look fine on my DS and I always run the most current
> versions since I am a beta tester.
>
> Aaron Sargent
> The Linen Barn
> linen@xxxxxxxxxxx
> 541-770-2957
> Medford, OR
> ----- Original Message -----
> From: "Thomas LaDow" <tcladow@xxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Wednesday, May 03, 2006 4:31 PM
> Subject: [amayausers] Re: Inconsistent Letter Height
>
>
>>I will have to do that tomorrow morning. I am at home and htis is where
>> Iget my emails for this group. Is there anyway I can change my account
>> to
>> my business email account? I am not sure even how I got signed on as it
>> took several tries. This forum would be great at work.
>>
>> I diod not notice this fault until I loaded the newest update I received
>> from Melco about 3 weeks ago. I did notice it at the Gurnee training
>> however thus the comment from the instructor. There however, we did not
>> sew out the text. The DS Pro + Inow have has the fonts that appear in
>> the
>> box to the left of the font box shgowing what they look like if that
>> helps.
>>
>> They also send me 2 mounting knobs to use in place of the 2 screws on my
>> hat
>> driver. Nice idea for sure but they will not fit in the space between
>> the
>> bar and the friver to install them as they are to big. Was wondering if I
>> could cut the threaded screw portion down with a hax saw without damaging
>> anything?
>>
>> Tom
>> ----- Original Message -----
>> From: "HK Acree" <hkacree@xxxxxxxxxxxx>
>> To: <amayausers@xxxxxxxxxxxxx>
>> Sent: Wednesday, May 03, 2006 6:13 PM
>> Subject: [amayausers] Re: Inconsistent Letter Height
>>
>>
>>> Tom,
>>> In DS, click up on the top, "Help", then "About Design Shop",,,,,Tell me
>>> what version you are running.
>>>
>>> In OS, when you start it, the screen shows a graphic for a few seconds,
>>> the
>>> version of OS is listed there..Tell me what version this is as well.
>>>
>>> Herb
>>> ----- Original Message -----
>>> From: "Thomas LaDow" <tcladow@xxxxxxxxxxx>
>>> To: <amayausers@xxxxxxxxxxxxx>
>>> Sent: Wednesday, May 03, 2006 4:05 PM
>>> Subject: [amayausers] Re: Inconsistent Letter Height
>>>
>>>
>>>>I have Pro plus which was purchased with the AMAYA in November 05. I
>>>>just
>>>> recently upgraded the Pro Plus and the OS with the upgrade CD sent to
>>>> me
>>>> 3
>>>> weeks ago.
>>>>
>>>> Tom
>>>> ----- Original Message -----
>>>> From: "HK Acree" <hkacree@xxxxxxxxxxxx>
>>>> To: <amayausers@xxxxxxxxxxxxx>
>>>> Sent: Wednesday, May 03, 2006 9:23 AM
>>>> Subject: [amayausers] Re: Inconsistent Letter Height
>>>>
>>>>
>>>>> Tom,
>>>>> What version of DS are you using. Did you have the problem with a
>>>>> previous
>>>>> version? How old is your AMAYA?
>>>>>
>>>>> Herb
>>>>> Royal Embroidery
>>>>> ----- Original Message -----
>>>>> From: "Thomas LaDow" <tcladow@xxxxxxxxxxx>
>>>>> To: <amayausers@xxxxxxxxxxxxx>
>>>>> Sent: Tuesday, May 02, 2006 3:34 PM
>>>>> Subject: [amayausers] Inconsistent Letter Height
>>>>>
>>>>>
>>>>>>I am sorry for posting this subject on another topic as a reply but I
>>>>>>am
>>>>>> unsure as to how to start a new subect. Since installing the new
>>>>>> AMAYA
>>>>>> and
>>>>>> DS Pro+ software updates, I have been experiencing some lettering
>>>>>> problems.
>>>>>> For example I enter USMC for a bag in DS using Athletic Block (I have
>>>>>> used
>>>>>> other fonts with the same results). The letter height was .75.
>>>>>> When
>>>>>> it
>>>>>> displays on my screen the letters are uneven, some higher than
>>>>>> others.
>>>>>> The
>>>>>> U had the left side lower than the right side. The C was higher than
>>>>>> the
>>>>>> USM. This also happened at my training in Chicago, but the
>>>>>> instructor
>>>>>> said
>>>>>> that the computer does this to compensate for pull factors and when
>>>>>> sewn
>>>>>> out, would sew out fine. Well it didn't sew out fine. It sewed out
>>>>>> just
>>>>>> as
>>>>>> it appeared on the screen. Why does the DS do this? How do I fix
>>>>>> it?
>>>>>> Thank you for any assoistance you can give me.. I read the board
>>>>>> every
>>>>>> day,
>>>>>> just not an avid poster.
>>>>>> ----- Original Message -----
>>>>>> From: "Russell Silva" <russell@xxxxxxxxxxxxxxxx>
>>>>>> To: <amayausers@xxxxxxxxxxxxx>
>>>>>> Sent: Monday, May 01, 2006 7:03 PM
>>>>>> Subject: [amayausers] Re: Backing up files
>>>>>>
>>>>>>
>>>>>>> Big companies like that do daily, weekly and monthly backups, their
>>>>>>> weekly
>>>>>>> and monthly backups get sent to a secure location where they are
>>>>>>> guarantied
>>>>>>> against loss.
>>>>>>>
>>>>>>> Russell
>>>>>>>
>>>>>>> ----- Original Message -----
>>>>>>> From: "Steve Cohen" <steve208321@xxxxxxxxxxx>
>>>>>>> To: <amayausers@xxxxxxxxxxxxx>
>>>>>>> Sent: Monday, May 01, 2006 5:56 PM
>>>>>>> Subject: [amayausers] Backing up files
>>>>>>>
>>>>>>>
>>>>>>>>I was never a fan of backing up files on CD-ROM and leaving them
>>>>>>>>around
>>>>>>>>in
>>>>>>>>a CD case if the hard drive crashes. Take Sept. 11 as sad as it was.
>>>>>>>>I
>>>>>>>>bet
>>>>>>>>less than 10% of those companies grabbed their backup tapes before
>>>>>>>>they
>>>>>>>>went running out of the building. They started businesses back up
>>>>>>>>from
>>>>>>>>nothing. No records of customers or anything. My point is if a
>>>>>>>>natural
>>>>>>>>disaster occurs, you not only loose all your files on the computer,
>>>>>>>>you
>>>>>>>>also loose your backup files as well. The best solution is to backup
>>>>>>>>offsite. One company I know is http://www.drbackup.net (There are
>>>>>>>>others
>>>>>>>>out there if you google off-site backup) Should your shop burn
>>>>>>>>down,
>>>>>>>>you
>>>>>>>>still have your files saved, just go buy a new computer and machine
>>>>>>>>and
>>>>>>>>you
>>>>>>>>are back up and running. Without your files, you have to start
>>>>>>>>everything
>>>>>>>>over again.
>>>>>>>> _________________________________________________________________
>>>>>>>> Join the next generation of Hotmail and you could win the adventure
>>>>>>>> of
>>>>>>>> a
>>>>>>>> lifetime
>>>>>>>> http://www.imagine-msn.com/minisites/sweepstakes/mail/register.aspx
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
Other related posts:
