[amayausers.com] Re: Horrible Noise when the Needle Case Moves
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 12 Mar 2010 16:45:28 UT
This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/894.html#000002
You need Brian (StringNet) to jump in here. We've had the same problem and if
you don't correct it, you WILL need a tech to REPLACE something. There is a way
to 're-align' the needle carrier, in the program where you go to 'head up' and
that stuff but I cannot remember it right now...very easy to do and that noise
will disappear. It's a mechanical alignment but you can reset it.
But let it keep going on and you will have damage!
Roland
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
