One Dongle for OS. One Dongle for Design Shop. Do not have to have the DS dongle for the OS to work. Herb Royal Embroidery ----- Original Message ----- From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Monday, February 27, 2006 3:14 PM Subject: [amayausers] Re: Help > Seems to me that there is a dongle for the software, another dongle > for the Amaya...you have to have 2 dongles to run both...so I'd check > that dongle again you didn't take! > > > Sunrise Graphics > 116 Main St > Claremont, NH 03743 > 603-543-1324 > fax 603-543-9902 > www.sunrisegraphics.org > signman@xxxxxxxxxxxxxxxxxxx > > > On Feb 27, 2006, at 5:45 PM, Barbara Hazelrig-Mirsky wrote: > >> I purchased a used Amaya. It has not been used for at least two >> months now. It took a while to convince the previous owner that the >> dongle belongs with the software, not the computer. I finally got >> brave enough to connect the machine. I resolved some issues with >> the computer and decided to use an older computer with the OS >> only. Its 384 MB Ram, 30GB hard drive, Windows XP and a Pentium 4 >> processor. Ethernet has to be handled through a USB adapter >> because the computer doesn't have an ethernet connection built >> in. So far, no problems with the Amaya OS. Turned the machine on >> and the standard start up stuff - laser and status lights. the >> status light goes from green to red. Software apparently works. >> Machine apparently works. But the software and= >> the machine do not know the other exists. I purchased a new Melco >> ethernet cable and the machines still haven't been introduced. Can >> someone point me in the right direction to look for the cure? The >> Operator's tool kit is >> on back order -- won't arrive until after St. Patty's day. As >> time permits I will look back through the postings to learn as much >> as I can. I want to make sure the machine is running before I >> spend the money to transfer the license on the OS software or >> decide to sell it and buy a new one - might be less expensive after >> all. :-) Thank you! >> >> >> > >