[amayausers.com] Re: Design help

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Fri, 22 May 2009 05:13:20 UT

This message was posted by Ian on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 

Most sites sell machine files. Machine files by definition are just code 
(cordinates, commands), much like a finished dish. The outline files that were 
used on the program used to create them are the recipe. Once everything is 
Cooked and plated, if you want a really useful wireframe, it has to be 
recreated or converted and heavily edited. The only truly "editable" file is 
the native file it was created in. If you know who the author is, find out what 
software they use. If they use Melco your in luck. If they do not, find a 
vendor that does.


The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list


Other related posts: