[amayausers] Re: Changing Thread Spools with EASE
- From: "Rod or Sharon" <springer37@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 21 Dec 2005 09:18:47 -0700
WELL................we are waiting>>>>>>any size needle eh??
Rod & Sharon Springer
Embroidery Cottage
Rod & Sharon Springer
Melco Amaya Tech & Trainer
Design Shop Pro+ Digitizing
Boise, ID 83713
208-938-3038
----- Original Message -----
From: Ed Orantes
To: amayausers@xxxxxxxxxxxxx
Sent: Wednesday, December 21, 2005 9:22 AM
Subject: [amayausers] Changing Thread Spools with EASE
Debbie,
Here's a tid bit... Have some of your needles on your Amaya ball point
and some of them sharps. Know in your own mind which ones they are so that
when you need to sew with an appropriate needle, all you have to do is change
out the spool of thread which takes me about 8 seconds and is easy as pie.
Just a suggestion.
Say, does everyone on the list know how to tie a knot when changing out
spools of thread so that the knot goes through any size needle??? I'll tell
you if you want to know.... Any takers???
Ed Orantes
504-258-6260
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of r.rinehartsr
Sent: Tuesday, December 20, 2005 8:46 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: (No Date: Thu, 15 Dec 2005 10:07:26 -0600
You know I will...NEXT TIME...LOL!!! I under-charged this first time,
but after I realized HOW HARD they are to hoop up and then you must change all
your ball point needles over to sharps and then back again...WELL, I learned
the hard way!!!! MERRY CHRISTMAS, Ed!!
Debbie in Indiana
----- Original Message -----
From: Ed Orantes
To: amayausers@xxxxxxxxxxxxx
Sent: Tuesday, December 20, 2005 11:33 AM
Subject: [amayausers] Re: (No Date: Thu, 15 Dec 2005 10:07:26 -0600
Great to hear Debbie.
Now go out there and charge them an arm and a leg for all your hard
work. Heh- heh.
Ed
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of r.rinehartsr
Sent: Friday, December 16, 2005 7:06 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: (No Date: Thu, 15 Dec 2005 10:07:26 -0600
Just wanted to say that the Carharts are DONE!!!!! YEA!!!! Since
they were on the front chest, I was not able to take out a seam and was forced
to hoop through all layers. One of the jackets had a heavy polar type fleece
lining and the others had flannel like quilted linings. After placing the top
hoop over the inside hoop, I used a short screwdriver to tighten the bolt a
little then adjust the hoop a little ( to keep it from popping off) and go
through those same steps until it wouldn't tighten anymore. I had a 3oz
cutaway for backing, no topping and used an MT of 9, but after several false
breaks, dropped it to 7 and it stitched beautifully at a speed of 1150. The
design and logo were about 10,000 stitches and so only needed the 5.9mm round
hoop. AFter dropping the MT, they all stitched without one break. It was a
purchased design consisting of a barn, silo, tree, fense, tractor sun and cloud
outline, plus the placid font, which was in my older Viking software. The font
was GREAT. So, all's well that ends well!!!!!!! THANKS for all your
help. DEBBIE
----- Original Message -----
From: Ruth Williams
To: amayausers@xxxxxxxxxxxxx
Sent: Thursday, December 15, 2005 3:53 PM
Subject: [amayausers] Re: (No Date: Thu, 15 Dec 2005 10:07:26 -0600
Thanks everyone, since I'm new to doing caps, that answers my
question and especially since they are black, the powered sugar shows more.
Ruth
----- Original Message -----
From: Ed Orantes
To: amayausers@xxxxxxxxxxxxx
Sent: Thursday, December 15, 2005 7:57 AM
Subject: [amayausers] Re: (No Date: Thu, 15 Dec 2005 10:07:26
-0600
Ruth,
Two things,... Either it's bobbin showing up on the top side
of the cap...-- tighten your bobbin and increase your material thickness to
accommodate.
or
It's the buckram that is showing itself in all of the needle
penetrations. Buckram is the hot glue like substance that is used in the cap
for face stability. We sometimes have to hit the cap with a felt lint brush to
"clean up" the face of the cap following the embroidery.
If your so called "dandruff" in only concentrated in one area
of the cap or design, then you will either need to change the settings in the
software or have the design edited for caps. Would have to see it to be sure.
Is there another term we can use other than dandruff? How
about something like "powered sugar". Yeah, in the holiday spirit.
Ed
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Ruth Williams
Sent: Wednesday, December 14, 2005 5:42 PM
To: Amayausers
Subject: [amayausers]
Hello Everyone,
I am doing caps and it looks like dandrift falling on my caps.
They are black caps. I've never known this to happen before or else I just
never saw it like it shows up on black. Anyone know about this?
Ruth lrembroidery@xxxxxxxxx
Other related posts:
