[amayausers.com] Re: Amaya & Non-Melco digitzing software; is it possible

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Tue, 5 May 2009 16:17:48 UT

This message was posted by Pascale on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 

Hi Tina,  Thanks again for the info.  That is great. Between your posts & Rod's 
I think I understand!  The Amaya OS software will read DST format from any 
digitizing software and it, in essence, is replaces the small screen that I 
have on my EMP6.  Are the buttons on the panel on the machine for "fine tuning" 
and doing the final "trace"?  One other quick question:   does the black 
"tray/table" below the bobbin arm of the Amaya ever get in the way, say when 
embroidering deep & non-flexible bags, or do you find that having the tray 
there actually helps support the project better?  Pascale


The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list


Other related posts: