[access-uk] Re: labelling spanners
- From: "David W Wood" <david.g3yxx@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 29 Jun 2014 17:07:43 +0100
Hi Terry
That is correct, however when I put them back, I put them back in sequence,
usually big to small and by type, E.G. ring, open, then socket.
Provided that you are meticulous, this should work.
The other way, albeit very expensive, would be to buy a complete Snap On set
with purpose made recesses in the cabinet!
ATB
David W Wood
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
terry
Sent: 29 June 2014 16:06
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: labelling spanners
Hi David
I like the sound of that, but does it also depend on you only taking one
item out at a time, so you then know the empty space on the wrack that it
should go back into?
Do you have a method of taking several out at a time, then knowing the
correct place for them to go back?
Any help appreciated.
Terry
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
David W Wood
Sent: 29 June 2014 15:53
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: labelling spanners
Hi Terry
I have a home made rack out of ash which has three places for each size of
spanner. A peg onto which I put the socket, a slot (open at the front) with
the open ended spanner hanging through it, and a peg onto which the ring
spanner hangs.
Above these I have labelled with dymo tape in Braille.
These are replicated for the metric spanners also.
HTH
ATB
David W Wood
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
terry
Sent: 29 June 2014 14:40
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: labelling spanners
I was kinda hoping that someone might say if the labels provided may be
suitable for my needs?
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Andrew Summers
Sent: 29 June 2014 14:08
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: labelling spanners
Have you thought about using the RNIB penfriend.
Andrew
----- Original Message -----
From: "terry" <terrycooper94@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, June 29, 2014 10:14 AM
Subject: [access-uk] labelling spanners
> Hi all, and those mechanics on the list.
>
> For years now I've left this problem, but now I'd like to do something
> about it.
>
> I mainly use imperial spanners, though that isn't important. I have
> them usually just in a tool tray, just all mixed together.
>
> I usually feel the size of the nut on the car, then take a selection
> of spanners out of the try that I think are close to the size I want,
> then try them one by one. Quite often, due to the large variations in
> imperial sizes, none of the ones I take out of the tray fit, so back
> to the tool tray and take out some more.
>
> It's very time consuming, and I'm really quite bored with it now.
>
> I'm looking for some sort of easy to use labeller, but one that uses
> labels that will stay attached to tools that get greasy.
>
> Are there any out there that might fit the bill? If there are any
> types of labels I could use that are durable, I could clean off the
> spanners and glue the labels to them, but I need the labels to be
> durable, as well as the label scanner.
> .
>
> Any thoughts and or feedback welcome.
>
> Terry
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
