[access-uk] Re: labelling spanners

  • From: "David W Wood" <david.g3yxx@xxxxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Sun, 29 Jun 2014 15:53:19 +0100

Hi Terry

I have a home made rack out of ash which has three places for each size of
spanner.  A peg onto which I put the socket, a slot (open at the front) with
the open ended spanner hanging through it, and a peg onto which the ring
spanner hangs.
Above these I have labelled with dymo tape in Braille.

These are replicated for the metric spanners also.

HTH

ATB

David W Wood 
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
terry
Sent: 29 June 2014 14:40
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: labelling spanners 

I was kinda hoping that someone might say if the labels provided may be
suitable for my needs?

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Andrew Summers
Sent: 29 June 2014 14:08
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: labelling spanners 

Have you thought about using the RNIB penfriend.

Andrew
----- Original Message -----
From: "terry" <terrycooper94@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, June 29, 2014 10:14 AM
Subject: [access-uk] labelling spanners


> Hi all, and those mechanics on the list.
>
> For years now I've left this problem, but now I'd like to do something 
> about
> it.
>
> I mainly use imperial spanners, though that isn't important.  I have them
> usually just in a tool tray, just all mixed together.
>
> I usually feel the size of the nut on the car, then take a selection of
> spanners out of the try that I think are close to the size I want, then 
> try
> them one by one.  Quite often, due to the large variations in imperial
> sizes, none of the ones I take out of the tray fit, so back to the tool 
> tray
> and take out some more.
>
> It's very time consuming, and I'm really quite bored with it now.
>
> I'm looking for some sort of easy to use labeller, but one that uses 
> labels
> that will stay attached to tools that get greasy.
>
> Are there any out there that might fit the bill?  If there are any types 
> of
> labels I could use that are durable, I could clean off the spanners and 
> glue
> the labels to them, but I need the labels to be durable, as well as the
> label scanner.
> .
>
> Any thoughts and or feedback welcome.
>
> Terry
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> 

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: