I have to say I have had very little trouble with my t-vonics box. I do get stuttering speech sometimes, but can live with that. Occasionally when I turn it on nothing happens. When this occurs, if I press the channel up key two or three times, it works just fine. I only have around 58% signal strength, but that does not cause me any problems. So generally I am very pleased, and all recordings I have made have come out well. David -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Yusuf Sent: 09 July 2012 12:50 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: TVonics - Amy On Strike! Ibrahim, I'm not going to try and convince you not to send your TVonics back to the RNIB, that's obviously your choice. All I can say is that mine has behaved itself very well since I bought it a couple of months ago. I've had upwards of 12 pages worth of recordings and I don't think I've had to do a reset at all. Admittedly I've had to turn it off and on a couple of times due to speech issues. It sounds like yours is a faulty unit. Yusuf On 09/07/2012 09:45, Ibrahim Gucukoglu wrote: > Hi Carol. > > After my box crashed on me on no less than 4 occasions this morning, > not to mention giving me hell with the speech with its stuttering and > jittering, I'm sending this back to the RNIB for a full refund. I cant > trust the box to record anything without worrying about the potential > for hard drive failure, and that's not my idea of spending the better > part of 200 quid so goodbye TVonics, it was nice knowing you. > > All the best, Ibrahim. > > -----Original Message----- From: Carol Pearson > Sent: Monday, July 09, 2012 9:30 AM > To: access-uk@xxxxxxxxxxxxx > Subject: [access-uk] Re: TVonics - Amy On Strike! > > Ugh! I didn't like reading that as the thought of paying out for a new > hard drive for this very new item doesn't appeal. > > I suppose there's no way of testing the drive in the TVonics either, > is there? > > I haven't had other problems and recordings have all been fine. > > Oh, what to do??? > > RNIB staff: Have you any thoughts here, please? > > > > Carol P > ---- Original Message ---- > From: "Mobeen Iqbal" <mobeeniqbal@xxxxxxxxx> > To: <access-uk@xxxxxxxxxxxxx> > Sent: Saturday, July 07, 2012 1:04 PM > Subject: [access-uk] Re: TVonics - Amy On Strike! > >> Hello Carol. >> >> This is probably due to a failing hard drive. The hard drives used in >> these machines were cheap hitachi drives, i've already had one >> behaving strangely. My box wouldn't offer me the option to format or >> to record. I have replaced the hard drive in the unit with a better >> drive made by seagate, formatted it and have had no further problems, >> no crashes, etc. Because the voice runs from the hard drive, if there >> are any errors on the drive or if its failing, it can cause you to >> experience crashes/freezing. I can replace the drive for you if you >> wish, please contact me off list and we can go from there. I'd >> recommend it to be honest, because if you do a lot of recording and >> the drive fails it would've been pointless you recording all those tv >> shows to watch later! >> all the best, >> >> Mo. >> >> >> On 07/07/2012 12:52, Carol Pearson wrote: >>> Hi all, >>> >>> We have a fairly regular saying at home which is "Amy's on strike". >>> This simply means that she fails to speak, often after booting up, >>> when we first go to use her. Of course, we find ways round, >>> sometimes needing to reboot the box again; but I wonder if anyone >>> else is finding this problem and if you have a better solution than >>> a bit of hit and miss and, finally, if you've concluded what's going >>> on and why! >>> Carol P >>> >>> ** To leave the list, click on the immediately-following >>> link:- ** >>> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>> ** If this link doesn't work then send a message to: >>> ** access-uk-request@xxxxxxxxxxxxx >>> ** and in the Subject line type >>> ** unsubscribe >>> ** For other list commands such as vacation mode, click on the ** >>> immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>> ** or send a message, to >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>> >> ** To leave the list, click on the immediately-following >> link:- ** >> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** access-uk-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the ** >> immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq