Thanks for this. The options I've got in the 'change synthesiser' menu are
remote access speech, Eloquence and SAPI 4 detect... When I enter on that
Jaws says there are no other SAPI supported synthesizers on my system.
I'm
running JFW7, which option do I go to for adding SAPI5?...cheers
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
Of
Chipmunks
Sent: 26 May 2006 11:56
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: RealSpeak Daniel
set jaws to use sapi 5 from the
language/change sytnehsizer menu
then go to options\\voice, global and select your preferred sapi 5
voice, in your case daniel.
Cheers,
Doris
Remember, though, that any of the "natural voices", whether by AT&T,
Scansoft, Neospeech, etc. take up a whole lot more resources than
Eloquence. thus you might find jaws somewhat sluggish when switched
to sapi 5. You probably want to have at least 1 gig of RAM to get
anything out of those voices.
I personally prefer Eloquence - or actually my beloved hardware synth
- with jaws and only use sapi 5 voices for reading or recording text
with something like TextRecorder.
hth
Doris
At 09:56 AM 5/26/2006 +0100, you wrote:
Hi
I've installed the fifteen day demo of RealSpeak's Daniel but how do
I switch to it from Jaws? I can't find any shortcuts to activate it
in the start menu and there are no options to activate it in JFW's
change synthesiser menu.cheers
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
__________ NOD32 1.1559 (20060525) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
