[access-uk] Re: RealSpeak Daniel
- From: "Sunil" <bosley20@xxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Fri, 26 May 2006 13:58:35 +0100
Cheers. I added it under installation maintenance but when I cursor around
in the combobox trying to select the voice Jaws crashes. I've tried four
times now and it keeps happening so I've given up.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Chipmunks
Sent: 26 May 2006 13:48
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: RealSpeak Daniel
Oh,Man, I am not positive on this one. If sapi 5 is not one of the
options in the "change synthesizer " menu, you might have needed to
select "sapi 5" duringn installation or add it by running the
installation maintenance from your start menu. you might want to give
that a try and see if sapi 5 is one of the choices you get for adding
synths. It should then show up in your synth menu.
Cheers,
Doris
At 01:13 PM 5/26/2006 +0100, you wrote:
>Thanks for this. The options I've got in the 'change synthesiser' menu are
>remote access speech, Eloquence and SAPI 4 detect... When I enter on that
>Jaws says there are no other SAPI supported synthesizers on my system. I'm
>running JFW7, which option do I go to for adding SAPI5?...cheers
>
>
>
>-----Original Message-----
>From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
>Chipmunks
>Sent: 26 May 2006 11:56
>To: access-uk@xxxxxxxxxxxxx
>Subject: [access-uk] Re: RealSpeak Daniel
>
>set jaws to use sapi 5 from the
>
>language/change sytnehsizer menu
>
>then go to options\\voice, global and select your preferred sapi 5
>voice, in your case daniel.
>
>Cheers,
>
>Doris
>Remember, though, that any of the "natural voices", whether by AT&T,
>Scansoft, Neospeech, etc. take up a whole lot more resources than
>Eloquence. thus you might find jaws somewhat sluggish when switched
>to sapi 5. You probably want to have at least 1 gig of RAM to get
>anything out of those voices.
>
>I personally prefer Eloquence - or actually my beloved hardware synth
>- with jaws and only use sapi 5 voices for reading or recording text
>with something like TextRecorder.
>
>hth
>
>Doris
>
>
>
>At 09:56 AM 5/26/2006 +0100, you wrote:
>
> >Hi
> >I've installed the fifteen day demo of RealSpeak's Daniel but how do
> >I switch to it from Jaws? I can't find any shortcuts to activate it
> >in the start menu and there are no options to activate it in JFW's
> >change synthesiser menu.cheers
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** access-uk-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
>__________ NOD32 1.1559 (20060525) Information __________
>
>This message was checked by NOD32 antivirus system.
>http://www.eset.com
>
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** access-uk-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
__________ NOD32 1.1560 (20060526) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
