interestingly my card is not shiny. > On 7 Jan 2015, at 09:18, Saqib Hussain <saqibh23@xxxxxxxxxxxxxx> wrote: > > Hi. The reason why it won't scan a card properly is because of the > contrast and the card is shiny. > >> On 06/01/2015, Eleanor Martha Burke <eleanormarthaburke@xxxxxxxxx> wrote: >> I did hear a demo but the demo did notScan and Visa card. >> >> >> >>> On 6 Jan 2015, at 16:51, Carol.Pearson29@xxxxxxxxxxxxxx >>> <carol.pearson29@xxxxxxxxxxxxxx> wrote: >>> >>> Hi Eleanor, >>> >>> I have tried two cards with no success this end, but remember I'm using an >>> IPhone 4S and not the latest! >>> >>> I do know that demos have been done of cards being scanned and able to >>> read the numbers. I'm not clear whether the demo just had a photo picture >>> taken, but I think that may be the case. (I heard the demo podcast just >>> once and didn't take too much notice as I wasn't going to do it at the >>> time.) >>> >>> The demo came from AppleVis, but I'm not sure which one it was. >>> >>> I hope this might jog someone's memory and you'll get the help, but I'll >>> try another route also and let you know if I hear anything useful. I do >>> know that it was being done accurately and usefully. >>> >>> Carol P >>> >>> ----- Original Message ----- From: "Eleanor Martha Burke" >>> <eleanormarthaburke@xxxxxxxxx> >>> To: <access-uk@xxxxxxxxxxxxx> >>> Sent: Sunday, January 04, 2015 11:44 PM >>> Subject: [access-uk] Re: K-NFB Reader app question >>> >>> >>>> has anybody had success with the KNFB reader Recognising the text on our >>>> Visa debit of the sex cardI cannot get it to recognise it. >>>> >>>> >>>> >>>>> On 4 Jan 2015, at 16:40, Ibrahim Gucukoglu <ibrahim_gucukoglu@xxxxxxxx> >>>>> wrote: >>>>> >>>>> Hi Jackie. >>>>> >>>>> KNFB will start to read a document as soon as it has recognised text >>>>> using the default voice for that language. In the case of UK English, >>>>> it will be Daniel, irrespective of which dialect you choose by default >>>>> or whether you are using Alex. The pause/play button is in the middle >>>>> of the screen at the bottom adjacent to next/previous sentence, and you >>>>> can turn off the automatic reading of text in the settings screen of the >>>>> app's main window. >>>>> >>>>> All the best and I hope this answers your question. >>>>> -----Original Message----- From: Jackie Brown >>>>> Sent: Sunday, January 04, 2015 12:21 PM >>>>> To: access-uk@xxxxxxxxxxxxx >>>>> Subject: [access-uk] K-NFB Reader app question >>>>> >>>>> I have always been aware of two voices speaking whenever I use the >>>>> K-NFB >>>>> Reader app on my iPhone. I have Alex as my default voice, but when I >>>>> load >>>>> the app and take a picture, Alex and Daniel speak. Alex will say >>>>> something >>>>> like "pause" or "play", and Daniel does the reading of whatever I have >>>>> scanned. But Alex can pipe in as well, and I do find it irritating at >>>>> times. I have tried using the app with Daniel as the default voice for >>>>> VoiceOver, but I then get two Daniel voices, and one is quite >>>>> definitely >>>>> enough where he is concerned! (smile). Is there anything I can do to >>>>> change >>>>> this sequence, or is it just one of the things the app does? >>>>> >>>>> Kind regards, >>>>> >>>>> Jackie Brown >>>>> Emails: jackieannbrown62@xxxxxxxxx >>>>> thebrownsplace@xxxxxxxxxxxxxx >>>>> jackie@xxxxxxxxxxxxxxxxxxx >>>>> Website: www.thebrownsplace.info >>>>> Twitter: @thebrownsplace >>>>> Skype: thejackmate >>>>> >>>>> ** To leave the list, click on the immediately-following link:- >>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>> ** If this link doesn't work then send a message to: >>>>> ** access-uk-request@xxxxxxxxxxxxx >>>>> ** and in the Subject line type >>>>> ** unsubscribe >>>>> ** For other list commands such as vacation mode, click on the >>>>> ** immediately-following link:- >>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>>> ** or send a message, to >>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>>> >>>>> ** To leave the list, click on the immediately-following link:- >>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>> ** If this link doesn't work then send a message to: >>>>> ** access-uk-request@xxxxxxxxxxxxx >>>>> ** and in the Subject line type >>>>> ** unsubscribe >>>>> ** For other list commands such as vacation mode, click on the >>>>> ** immediately-following link:- >>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>>> ** or send a message, to >>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>> ** To leave the list, click on the immediately-following link:- >>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>> ** If this link doesn't work then send a message to: >>>> ** access-uk-request@xxxxxxxxxxxxx >>>> ** and in the Subject line type >>>> ** unsubscribe >>>> ** For other list commands such as vacation mode, click on the >>>> ** immediately-following link:- >>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>> ** or send a message, to >>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>> >>> ** To leave the list, click on the immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>> ** If this link doesn't work then send a message to: >>> ** access-uk-request@xxxxxxxxxxxxx >>> ** and in the Subject line type >>> ** unsubscribe >>> ** For other list commands such as vacation mode, click on the >>> ** immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>> ** or send a message, to >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>> >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** access-uk-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >> >> > > > -- > You can find me on Twitter @Saq5000 and Skype Saq5000 > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq