I did hear a demo but the demo did notScan and Visa card. > On 6 Jan 2015, at 16:51, Carol.Pearson29@xxxxxxxxxxxxxx > <carol.pearson29@xxxxxxxxxxxxxx> wrote: > > Hi Eleanor, > > I have tried two cards with no success this end, but remember I'm using an > IPhone 4S and not the latest! > > I do know that demos have been done of cards being scanned and able to read > the numbers. I'm not clear whether the demo just had a photo picture taken, > but I think that may be the case. (I heard the demo podcast just once and > didn't take too much notice as I wasn't going to do it at the time.) > > The demo came from AppleVis, but I'm not sure which one it was. > > I hope this might jog someone's memory and you'll get the help, but I'll try > another route also and let you know if I hear anything useful. I do know > that it was being done accurately and usefully. > > Carol P > > ----- Original Message ----- From: "Eleanor Martha Burke" > <eleanormarthaburke@xxxxxxxxx> > To: <access-uk@xxxxxxxxxxxxx> > Sent: Sunday, January 04, 2015 11:44 PM > Subject: [access-uk] Re: K-NFB Reader app question > > >> has anybody had success with the KNFB reader Recognising the text on our >> Visa debit of the sex cardI cannot get it to recognise it. >> >> >> >>> On 4 Jan 2015, at 16:40, Ibrahim Gucukoglu <ibrahim_gucukoglu@xxxxxxxx> >>> wrote: >>> >>> Hi Jackie. >>> >>> KNFB will start to read a document as soon as it has recognised text using >>> the default voice for that language. In the case of UK English, it will be >>> Daniel, irrespective of which dialect you choose by default or whether you >>> are using Alex. The pause/play button is in the middle of the screen at >>> the bottom adjacent to next/previous sentence, and you can turn off the >>> automatic reading of text in the settings screen of the app's main window. >>> >>> All the best and I hope this answers your question. >>> -----Original Message----- From: Jackie Brown >>> Sent: Sunday, January 04, 2015 12:21 PM >>> To: access-uk@xxxxxxxxxxxxx >>> Subject: [access-uk] K-NFB Reader app question >>> >>> I have always been aware of two voices speaking whenever I use the K-NFB >>> Reader app on my iPhone. I have Alex as my default voice, but when I load >>> the app and take a picture, Alex and Daniel speak. Alex will say something >>> like "pause" or "play", and Daniel does the reading of whatever I have >>> scanned. But Alex can pipe in as well, and I do find it irritating at >>> times. I have tried using the app with Daniel as the default voice for >>> VoiceOver, but I then get two Daniel voices, and one is quite definitely >>> enough where he is concerned! (smile). Is there anything I can do to change >>> this sequence, or is it just one of the things the app does? >>> >>> Kind regards, >>> >>> Jackie Brown >>> Emails: jackieannbrown62@xxxxxxxxx >>> thebrownsplace@xxxxxxxxxxxxxx >>> jackie@xxxxxxxxxxxxxxxxxxx >>> Website: www.thebrownsplace.info >>> Twitter: @thebrownsplace >>> Skype: thejackmate >>> >>> ** To leave the list, click on the immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>> ** If this link doesn't work then send a message to: >>> ** access-uk-request@xxxxxxxxxxxxx >>> ** and in the Subject line type >>> ** unsubscribe >>> ** For other list commands such as vacation mode, click on the >>> ** immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>> ** or send a message, to >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>> >>> ** To leave the list, click on the immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>> ** If this link doesn't work then send a message to: >>> ** access-uk-request@xxxxxxxxxxxxx >>> ** and in the Subject line type >>> ** unsubscribe >>> ** For other list commands such as vacation mode, click on the >>> ** immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>> ** or send a message, to >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** access-uk-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq