[access-uk] Re: Anyone using Intellipanel?
- From: "David W Wood" <g3yxx@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 4 Jun 2008 16:31:25 +0100
Ray, George and all:
Free from B Gas today I received a power saver which, once set up, will shut
down whatever is plugged into 4 of the six sockets, when the infra-red
remote control is activated and vice versa.
This strikes me that it could be more effective!
David W Wood
GUILDFORD PHYSIOTHERAPY AND SPORTS CLINIC
MATTHEWS HOUSE
85 EPSOM ROAD
GUILDFORD
SURREY GU1 3PA
T: 01483 575876 (APPOINTMENTS)
302691 (ALL OTHER INQUIRIES)
E: reception@xxxxxxxxxxxxxxxxxxx
W: http://tinyurl.com/5wptcp
____________________
DISCLAIMER
The information contained in this e-mail is strictly confidential and is
intended solely for the individual/s to whom it is addressed. If you are not
the intended recipient or have received this e-mail in error please delete
it immediately. Any disclosure including but not withstanding reading
copying or distribution of all or part of the information contained herein
is strictly prohibited and may be unlawful. Although this email and any
attachments are believed to be free of any virus or any other defect which
might affect any computer or system on which they are received and/or opened
it is the responsibility of the recipient to ensure that they are virus free
and no responsibility is accepted by The Guildford Physiotherapy and Sports
Clinic for any loss or damage arising in any way from receipt or use
thereof. Any opinions or advice contained in this email are not
necessarily those of The Guildford Physiotherapy and Sports Clinic or any
individual or individuals working or acting on its behalf.
All prices shown are in pounds sterling and exclude VAT, Delivery and
Expense charges unless otherwise stated.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
George Bell
Sent: Wednesday, June 04, 2008 10:04 AM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Anyone using Intellipanel?
Hi Ray,
Their web site makes the statement, “Lowest standby power of just 0.4 of a
watt saving an average 35 watts per hour depending on the number of
connected peripherals. This product can pay for itself in less than a year
of use!”.
To me this is akin to these ISP comments about broadband speed when they say
“Up to 8 megabtyes” – emphasis on the “Up to”.
So how does one define “depending on the number of peripherals”?
Call me a “Tight fisted Jock”, but what’s wrong with a simple multi-plug
extension cable, and hitting the power switch to that after you power off?
Standby power is then zero.
George.
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Rays Home
Sent: 03 June 2008 22:30
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Anyone using Intellipanel?
This afternoon I saw a power strip that turns off computer periferals
automatically when you turn off your PC thus claiming to save power
"intelligently". Anyone used one of these? There's an Intelliplug too for
powering just two devices as opposed to the seven the Intellipanel handles.
My only quible is that in standby mode the device itself consumes, if my
calculations are correct, 100 watts or so. that's quite a lot so I wonder
what with the cost of buying the unit and running it whether savings are
that great.
More at:
http://www.mediaatlantic.com/section.php/1730/0
Cheers,
Ray.
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.24.6/1481 - Release Date: 03/06/2008
19:31
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.24.6/1481 - Release Date: 03/06/2008
19:31
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
