Il giorno 28 marzo 2014 18:01, Eugenio Ciceri <eugenio.ciceri@xxxxxxxxx> ha scritto: > >> >> La DV3 poteva formattare a scelta su singola o doppia faccia, >>> >> >> Sì, mi sembra anche la Plus D. Ma chi ha mai usato la singola faccia? >> Perché uno dovrebbe aver bisogno di minore capacità? > > > Era utilissimo per non buttare via i floppy difettosi se il difetto era su > una faccia sola :-) > > A questo proposito, il comando format della DV3 era di una versatilià unica. Permetteva di decidere anche il numero di tracce e lo stepping rate. Dal manuale del Kempston DOS: -------------------------------------------------------------------------------------------------------- 2.8 FORMAT command FORMAT will format a disc in the specified drive. syntax: PRINT#4 : FORMAT "disc_name": PRINT p1, p2, p3, p4 where disc_name is any valid name up to 10 characters and, p1 := the number of the specified drive (1 - 4) p2 := the number of tracks p3 := the number of sides (1 or 2) p4 := the stepping rate (1 to 4 where the stepping rates correspond to 6, 12, 20 and 30ms. So for example: A Mitsubishi 80-track, 2-sided drive with a stepping rate of 3ms could be formatted on drive 1 as follows, PRINT#4 : FORMAT "disc_name" : PRINT 1,80,2,1 A CATalogue of which would show a disc capacity of 800 kbytes 795 of which are available to the user. (The other 5 bytes are used by the directory). -------------------------------------------------------------------------------------------------------- Il che, incidentalmente, risolve i temi della capacità (800KB) e della fat (fissa, 5K. Resta da capire a quanti file corrispondono) Il manuale del Kempston DOS è disponibile su WoS: ftp://ftp.worldofspectrum.org/pub/spectrum/hardware-info/KempstonDiscInterface_Manual.pdf