I accidentally installed the wrong flyback and had that symptom, double check the flyback number. Tony Saracco TCS ELECTRONICS 406 Andra Ct. Gilberts, IL 60136 tcselectronics@xxxxxxxxx ----- Original Message ----- From: "Bill Grabowski" <bgrabowski@xxxxxxxxx> To: "TechAssist" <techassist@xxxxxxxxxxxxx> Sent: Friday, August 20, 2004 3:56 PM Subject: [TechAssist] Zenith PVR5263RK filaments lit way to high > I did a kit rebuild on this 9-1302-07 PS/Defl board and also the > focus/divider block. But only to discover the filaments are running way > to high. Like white hot not red. Does any fellow tech have a solution to > this problem. I'd swear I had this before but just can't seem to figure > this out. The kit was from Tritronics and the block/focus also the > generic type. Any help would be appreciated. Have a great weekend > everyone............ > > Bill G. > -- > ***************************** > Bill Grabowski > Triangle Appliance > Kenosha,Wi 53142 > 262-694-6500 > 262-694-6523 fax > bgrabowski@xxxxxxxxx > ***************************** > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/