[TechAssist] Re: RCA, G36705, CTC197, No Sound

  • From: "LeRoy Westlund" <llw@xxxxxxxxxx>
  • To: "TechAssist" <techassist@xxxxxxxxxxxxx>
  • Date: Sat, 28 Aug 2004 10:38:25 -0600

Eric,
Yes, I tried one of the RCA EPROMs, and it worked. Only problem is the
picture was too snowy with the RCA part installed. Maybe it has tuner
parameters (or AFT, RF AGC, or something) in it,....I don't know. I may
still need a service manual for
this unit.
I don't know how to do the reset function.

Thanks,
LLW

LeRoy Westlund
Westlund TV & Electronics
97 North Main                                "Where there's a will,...
Centerfield, UT 84622-0087           There's always a way."
Ph./Fax  435-528-3822
mailto:LLW@xxxxxxxxxx

-----Original Message-----
From: Eric Manuel <tvman@xxxxxxxxxxxxxxx>
To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx>
Date: Saturday, August 28, 2004 5:43 AM
Subject: [TechAssist] Re: RCA, G36705, CTC197, No Sound


>Hi Leroy did you try the reset in the menu or try an Eeprom from an
>rca set.I am not sure that this will work as I dont know if it has
>a service menu.Worth a try  Eric
>Eric Manuel
> E M Electronics
> Deer Lake Nfld
> Canada
>
>LeRoy Westlund wrote:
>>
>> Can you do that with a 13" Samsung TV, also ?
>> I have 4 of them that shows full volume on the OSD, but has NO sound.
>> The model is TXD1372. Maybe someone could send me some info on how to do
>> this.
>>
>> Regards,
>> LLW
>>
>> LeRoy Westlund
>> Westlund TV & Electronics
>> 97 North Main                                "Where there's a will,...
>> Centerfield, UT 84622-0087           There's always a way."
>> Ph./Fax  435-528-3822
>> mailto:LLW@xxxxxxxxxx
>>
>> -----Original Message-----
>> From: Phil Bader <tjanphyl@xxxxxxxxxxxxxxx>
>> To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx>
>> Date: Friday, August 27, 2004 3:18 PM
>> Subject: [TechAssist] Re: RCA, G36705, CTC197, No Sound
>>
>> >If you can access the service menu and see all the parameters, why can't
>> >you just go to the offending parameter and change that value?
>> >Another make TV (Sharp?) that loses sound, that's what you do.
>> >Phil Bader
>> >
>> >al m wrote:
>> >
>> >># 16 means the I2C run bus is latched. The EPROM has to be changed or
>> >>reinitialized with chipper check.
>> >>Al Marquardt
>> >>ampm@xxxxxxx
>> >>Al Marquardt Electronic Repair
>> >>206 W Main
>> >>Girardville Pa. 17935
>> >>----- Original Message -----
>> >>From: <daryls_tv@xxxxxxx>
>> >>To: <TechAssist@xxxxxxxxxxxxx>
>> >>Sent: Friday, August 27, 2004 9:23 AM
>> >>Subject: [TechAssist] RCA, G36705, CTC197, No Sound
>> >>
>> >>
>> >>
>> >>
>> >>>Hi,
>> >>>I guess I have been fortunate not to encounter this type of problem on
>> >>>
>> >>>
>> >>this chassis until now.  I suspect the eeprom.  I checked the menu
setting
>> >>and it shows "variable audio 1 speakers ON", "variable audio 2 speakers
>> OFF,
>> >>"fixed audio 3 speakers OFF".  I tried to change these settings but no
>> >>effect.  The volume bar is functioning.  I unplugged the set for
several
>> >>minutes to see if the Guide Plus would possibly be the problem but no
>> help.
>> >>I am getting error code 16 but I don't have any information as to what
>> this
>> >>correlates to.  I checked all of my tips and old e-mails for help and
all
>> I
>> >>found was to re-initialize the eeprom.  I also tried an external
speaker
>> and
>> >>tried the mechanical speaker switch in the rear of the set.
>> >>
>> >>
>> >>>Can I write the perimeters down before I change the eeprom like you do
in
>> >>>
>> >>>
>> >>the 177/187 series sets and place them into the new one?.  As you
probably
>> >>figured out, I don't have Chipper Checker and I don't have it in my
>> future.
>> >>
>> >>
>> >>>Any help or tips would be appreciated.
>> >>>Daryl
>> >>>Daryl's TV
>> >>>2402 Wyoming Ave.
>> >>>El Paso, TX  79903
>> >>>915-565-9184 Voice/Fax
>> >>>daryls_tv@xxxxxxx
>> >>>www.angelfire.com/tv2/daryls_tv
>> >>>
>> >>>
>> >>>
>>
>>>-------------------------------------------------------------------------
>> -
>> >>>
>> >>>
>> >>---
>> >>
>> >>
>> >>>Lost Password:
>> >>>http://www.tech-assist.org  and select "Login Problems?".
>> >>>Email Archives:
>> >>>//www.freelists.org/archives/techassist/
>> >>>
>> >>>
>> >>>
>> >>>
>> >>
>> >>
>> >>
>>
>>--------------------------------------------------------------------------
>> ---
>> >>Lost Password:
>> >>http://www.tech-assist.org  and select "Login Problems?".
>> >>Email Archives:
>> >>//www.freelists.org/archives/techassist/
>> >>
>> >>
>> >>
>> >
>> >--
>> >
>> >Philip Bader
>> >Jan Phyl TV Inc. (estab. 1976)
>> >3420 Recker Hwy. Winter Haven, Fl. 33880
>> >Fax (863) 299-8821
>> >email: tjanphyl@xxxxxxxxxxxxxxx
>> >
>> >
>> >
>>
>---------------------------------------------------------------------------
>> --
>> >Lost Password:
>> >http://www.tech-assist.org  and select "Login Problems?".
>> >Email Archives:
>> >//www.freelists.org/archives/techassist/
>> >
>>
>> -------------------------------------------------------------------------
----
>> Lost Password:
>> http://www.tech-assist.org  and select "Login Problems?".
>> Email Archives:
>> //www.freelists.org/archives/techassist/
>
>---------------------------------------------------------------------------
--
>Lost Password:
>http://www.tech-assist.org  and select "Login Problems?".
>Email Archives:
>//www.freelists.org/archives/techassist/
>



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts: